Envirotex Lite Resin

Polytek Development Corp

Revision date : 2023-09-13

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 4
Safety risk rating 4
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

90-100

Listed in

EC/CAS

68609-97-2

Name of the chemical

Oxirane, mono[(C12-14-alkyloxy)methyl] derivs

Concentration

0-10

Listed in

General Information

Revision date

2023-09-13

Product name

Envirotex Lite Resin

1.2.1 Relevant identified uses

Epoxy Resin. For Industrial/Professional use only

Manufacturer Name

Polytek Development Corp

Emergency telephone

800-424-9300, +1 703-527-3887

Icons in SDS

GHS07 M004 M009 M011 M017

Company Information

company name

Polytek Development Corp

e-mail address of the competent person responsible for the Safety Data Sheet

sds@polytek.com

GHS Information

Signal word

Warning

Section 2

SECTION 2: Hazards identification

product may cause violent steam generation or eruption.

2.1 Classification of the substance or mixture

Skin Irritation – Category 2 Eye Irritation – Category 2A Skin Sensitization – Category 1 Hazardous to the Environment – Chronic Hazard Category 2

2.2 Label elements

Warning 6. Accidental Release Measures Personal Precautions, Protective Equipment and Emergency Procedures: Clear non-emergency personnel from the area. Wear

Hazard statements

H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects appropriate protective clothing to prevent eye and skin contact and avoid breathing fumes or vapors. Methods and Materials for Containment and Cleanup: Cover with an inert absorbent material and collect into an appropriate container for disposal. Avoid releases to the environment.

Precautionary statements

P260 Avoid breathing fumes, mists, or vapors. P273 Avoid release to the environment. P280 Wear protective gloves and eye protection. P302+P352 IF ON SKIN Wash with plenty of water. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P317 If skin irritation or rash occurs Get medical help. P337+P317 If eye irritation persists Get medical help. P362+P364 Take off contaminated clothing and wash it before reuse. P391 Collect spillage. P501 Dispose of contents and container in accordance with local regional and national regulations.

Additional information

This is one part of a two-part system. Read and understand the hazard information on the hardener before use 7. Handling and Storage Safe Handling: Keep out of reach of children. Avoid breathing fumes, vapors, or mists. Avoid contact with eyes, skin, and clothing. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Safe Storage: Store away from incompatible materials. Store in a tightly closed original container in a dry, cool, and well-ventilated place. Read and follow manufacturer’s recommendations. 8. Exposure Controls/Personal Protection Occupational Exposure Limits: None established. Ventilation: Use with adequate general or local exhaust ventilation to minimize exposure levels. Respiratory Protection: If ventilation is inadequate, use a properly fitted, NIOSH-approved, air-purifying respirator with organic vapor cartridges. For higher exposures or in an emergency, use a supplied-air

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.