Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
General Information
Revision date
2018-09-13
Product name
EasyFlo Black Liquid Plastic Part A
1.2.1 Relevant identified uses
Component for Mold Making and Casting. For
Manufacturer Name
Polytek Development Corp
Icons in SDS
Company Information
company name
Polytek Development Corp
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polytek.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H304, H315, H317, H320, H332, H334, H335, H373
Hazard statements
Code
Statements
H304
May be fatal if swallowed and enters airways
Section 2
2.1 Classification of the substance or mixture
Acute Toxicity - Inhalation Category 4 Skin Irritation Category 2 Eye Irritation Category 2B Respiratory Sensitization Category 1 Skin Sensitization Category 1B Specific Target Organ Toxicity-Single Exposure Category 3 Specific Target Organ Toxicity-Repeat Exposure Category 2 Aspiration Toxicity 1
2.2 Label elements
Danger
Hazard statements
H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H320 Causes eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged and repeated exposure.
Precautionary statements
P261 Avoid breathing vapors or mists. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, protective clothing, eye protection, and face protection. P284 In case of inadequate ventilation, wear respiratory protection. P301+310IF SWALLOWED: Immediately call POISON CENTER/doctor. P302+352 IF ON SKIN: Wash with plenty of soap and water. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304+340 IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. P312 Call POISON CENTER/doctor if you feel unwell. P331 Do NOT induce vomiting. P332+313If skin irritation occurs: Get medical advice/attention. P337+313If eye irritation persists: Get medical advice/attention. P342+311If experiencing respiratory symptoms: Call a POISON CENTER/doctor. P362+364Take off contaminated clothing and wash before reuse. P403+233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents and container in accordance with local, regional and national regulations.
Additional information
Individuals sensitized to isocyanates should discontinue use. This is one part of a two-part system. Read and understand the hazard information on part B before using.
