Note: Ingredients listed on restricted chemical lists
EC/CAS
6846-50-0
Name of the chemical
2,2,4-trimethyl-1,3-pentanediol diisobutyrate
Concentration
30-40 30-40
General Information
Revision date
2021-02-08
Product name
EasyFlo 60 Liquid Plastic Part B
CAS No.
6846-50-0
1.2.1 Relevant identified uses
Component for Polyurethane Casting/Mold Shell Plastic. For Industrial/Professional use only
Manufacturer Name
Polytek Development Corp
Emergency telephone
800-424-9300, +1 (703) 527-3887
Icons in SDS
Company Information
company name
Polytek Development Corp
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polytek.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Eye Irritation Category 2A Reproductive Toxin Category 2
2.2 Label elements
Warning as required to appropriate authorities. 7. Handling and Storage
Hazard statements
H319 Causes serious eye irritation. H361 Suspected of damaging fertility or the unborn child Safe Handling: Use with adequate ventilation. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not eat, drink or smoke in the work area. Keep container closed when not in use.
Precautionary statements
P203 Obtain, read, and follow all safety instructions before use. P264 Wash hands thoroughly after handling. P280 Wear protective gloves, protective clothing, and eye protection/face protection. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P318 IF exposed or concerned, get medical advice. P337+P317 If eye irritation persists Get medical help. P501 Dispose of contents and container in accordance with local regional and national regulations.
Additional information
This is one part of a two-part system. Read and understand the hazard information on Part A before using Safe Storage: Store indoors at 60-95°F (15-35°C). Store in original containers. Avoid getting moisture into containers. Keep containers tightly closed. 8. Exposure Controls/Personal Protection Occupational Exposure Limits: None Established Ventilation: Use with adequate general or local exhaust ventilation to minimize exposure. Respiratory Protection: If needed, an approved respirator with organic vapor cartridges may be used. Respirator selection and use should be based on contaminant type, form and concentration. For higher exposures or in an emergency, use a supplied-air respirator. Skin Protection: Wear impervious gloves, such as butyl rubber or nitrile rubber. Eye Protection: Wear chemical safety glasses or goggles.