Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
N/A
EC/CAS
98-83-9
Name of the chemical
alpha-Methylstyrene
Concentration
N/A
General Information
Revision date
2019-04-19
Product name
HYDREX 33375
Manufacturer Name
Polynt Composites Korea Co. Ltd
Icons in SDS
Company Information
company name
Polynt Composites Korea Co. Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H304, H315, H319, H332, H335, H341, H351, H360, H370, H372, H411
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classified as Hazardous according to the New Zealand Hazardous Substances Regulations. Classified as Dangerous Goods for transport according to New Zealand Standard.
ADG classification
Class 3
UN Number
1866, Resin Solution, Flammable EPA New Zealand Approval Code: HSR001221
HSNO Classifications
3.1C Flammable Liquid 6.1E Acute Toxicity, Oral/Dermal 6.1D Acute Toxicity, Inhalation 6.3A Substance that is corrosive or irritating to the skin 6.4A Substance that is corrosive or irritating to the eye 6.6B Suspected human mutagen 6.7B Suspected human carcinogen 6.9B May cause damage to target organs through prolonged/repeated exposure 9.1C Aquatic ecotoxicity, Fish
Hazard statements
H226 Flammable liquid and vapour H304 May be fatal if swallowed and enters airways H315 Causes skin irritation H319 Causes serious eye irritation H332 Harmful if inhaled H335 May cause respiratory irritation H341 Suspected of causing genetic defects H351 Suspected of causing cancer H360 May damage fertility or the unborn child H370 Causes damage to organs H372 Causes damage to organs (blood system, liver, central nervous system, respiratory tract) through prolonged or repeated exposure H411 Toxic to aquatic life with long lasting effects
Prevention
P201 Obtain special instruction before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat, sparks, open flames and hot surfaces. – No smoking P233 Keep container tightly closed P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical ventilating, lighting and other equipment P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P260 Do not breath fumes, mists, vapours or spray P261 Avoid breathing dust/fume/gas/mist/vapours/spray P264 Wash thoroughly after handling P270 Do not eat, drink or smoke when using this product P271 Use only outdoors or in a well ventilated area P280 Wear protective gloves, protective clothing and eye or face protection P281 Use personal protective equipment as required
Response
P301+P310 IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician P302+P352 IF ON SKIN: Wash with plenty of soap and water P303+P361+P353 IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P308+P313 If exposed or concerned: Get medical advice P312 Call a POISON CENTRE or doctor/physician if you feel unwell P314 Get medical advice or attention if you feel unwell P331 Do NOT induce vomiting P332+P313 If skin irritation occurs: Get medical advice/attention P362 Take off contaminated clothing and wash before reuse P332+P313 If skin irritation occurs: Get medical advice/attention P337+P313 If eye irritation persists: Get medical advice/attention P370+P378 In case of fire, use carbon dioxide, dry chemical, water fog. Alcohol resistant foam is the preferred firefighting medium, but if it is not available, normal foam can be used
Storage
P403+P233 Store in well ventilated place, keep container tightly closed P403+P235 Store in a well ventilated place. Keep cool P405 Store locked up P422 Store contents below 25oC
Disposal
P501 Dispose of contents to an approved waste disposal plant Other hazard risks which are not included in the classification criteria NFPA-grade (0~4) level: Health 2, Flammability 3, Reactivity 2 Strongly exothermic polymerization may be caused by: Heat Free radical formers Peroxides