Note: Ingredients listed on restricted chemical lists
General Information
Version
01
Product name
ULTRAURE A-80 TOPCOAT RESIN (POLYOL)
CAS No.
1330-20-7
1.2.1 Relevant identified uses
Resin component of a two-part polyurethane, UV resistant coating
supplier name
Polymer Group Ltd
Icons in SDS
Company Information
company name
Polymer Group Ltd
Section 2
SECTION 2: Hazards identification
Hazard statements
Classified as hazardous according to criteria in the Hazardous Substances (Minimum Degrees of Hazard) Regulations 2001.
HSNO Classifications
3.1B, 6.1E (Oral), 6.1E (Dermal), 6.1E (Inhalation) 6.3A HSNO Approval Number: HSR002544 Hazard and Precautionary Statements: Flammable liquid and vapour Causes skin irritation May be harmful if swallowed May be harmful in contact with skin May be harmful if inhaled
Prevention
Keep out of reach of children Read Safety Data Sheet before use Keep away from heat, sparks, open flames, hot surfaces. No smoking Keep container tightly closed Ground/bond container and receiving equipment Use explosion-proof electrical, ventilating, lighting equipment Use only non-sparking tools. Take precautionary measures against static discharge Wear protective gloves, eye and face protection Wash hands thoroughly after handling
Response
If medical advice is needed, have product container or label at hand. Call Poison Centre or doctor/physician if you feel unwell. If inhaled – Call a Poisons Centre or doctor/physician if you feel unwell. Do NOT induce vomiting. If on Skin – Wash with plenty of soap and water. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Specific treatment (see first aid instruction on label). If skin irritation occurs, get medical advice/attention. If swallowed – Call a Poison Centre or doctor/physician if you feel unwell. Rinse mouth. Do NOT induce vomiting. In Case of Fire: Use CO2, powder or water spray
Storage
Store in a well ventilated place. Keep cool.
Disposal
Recycle wherever possible. Bury residue in an authorised landfill. Recycle containers if possible. If not possible, dispose of in an authorised landfill. Containers may still present a chemical hazard/danger when empty. If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill. Contact appropriate Waste Management Company for guidance and disposal options in your area. Where possible retain label warnings and MSDS and observe all notices pertaining to the product.