Note: Ingredients listed on restricted chemical lists
EC/CAS
111-15-9
Name of the chemical
2-ethoxyethyl acetate
Concentration
N/A
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
N/A
General Information
Product name
ULTRAURE A-80 TOPCOAT HARDENER
1.2.1 Relevant identified uses
Hardener component of a two-part polyurethane UV resistant coating
supplier name
Polymer Group Ltd
Icons in SDS
Company Information
company name
Polymer Group Ltd
Section 2
Hazard statements
Classified as hazardous according to criteria in the
Hazardous Ingredients
Minimum Degrees of Hazard) Regulations 2001
HSNO Classifications
3.1B, 6.1D, 6.3A, 6.4A, 6.5A, 6.5B HSNO Approval Code: HSR002662 Hazard and Precautionary Statements: Highly flammable liquid and vapour Harmful if swallowed Harmful in contact with skin Harmful if inhaled Causes skin irritation Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction
Prevention
Keep out of reach of children Read Safety Data Sheet before use Keep away from heat, sparks, open flames, hot surfaces. No smoking. Keep container tightly closed Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating, lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge Wash hands and face thoroughly after handling Do not eat, drink or smoke when using this product Wear protective gloves, eye and face protection Avoid breathing dust, fumes, gas, mist, vapours, spray. In case of inadequate ventilation wear respiratory protection. Use only outdoors or in a well-ventilated area.
Response
If medical advice is needed, have product container or label at hand. Call Poison Centre or doctor/physician if you feel unwell. See specific measures for first aid on this label. Contaminated work clothing should not be allowed out of the workplace. If inhaled – If breathing is difficulty, remove to fresh air and keep at rest in a position comfortable for breathing. Call a Poisons Centre or doctor/physician if you feel unwell. If experiencing respiratory symptoms, call a Poison Centre or doctor/physician. If on Skin – Remove/take off immediately all contaminated clothing. Wash with plenty of soap and water. Wash contaminated clothing before re-use. If skin irritation or rash occurs, get medical advice/attention. Use a cleansing agent on skin. If swallowed – Call a Poison Centre or doctor/physician if you feel unwell. Rinse mouth. Do NOT induce vomiting. If in eyes – Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. In Case of Fire: Extinguish with foam, water spray, fog, dry chemical or carbon dioxide. Do not use water in a jet.
Storage
Store in a cool, well ventilated place away from heat and ignition sources. Keep partially used containers closed. Store away from strong oxidants, foodstuffs, clothing and out of reach of children.
Disposal
Recycle wherever possible. Bury residue in an authorised landfill. Recycle containers if possible. If not possible, dispose of in an authorised landfill. Containers may still present a chemical hazard/danger when empty. If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill. Contact appropriate Waste Management Company for guidance and disposal options in your area. Where possible retain label warnings and MSDS and observe all notices pertaining to the product.