Note: Ingredients listed on restricted chemical lists
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
15%
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
10%
General Information
Version
02
Product name
ACE 121 Timber Preservative Part A
Product Synonyms
Paint – Flammable Liquid
1.2.1 Relevant identified uses
After blending with appropriate Part B it is used as a protective coating
supplier name
Polymer Group Ltd
Icons in SDS
Company Information
company name
Polymer Group Ltd
Hazard Codes
Hazard statements (CLP)
H225, H303, H305, H313, H315, H317, H319, H333, H334, H371, H373, H401
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Hazard statements
Classified as hazardous according to criteria in the Hazardous Substances (Minimum Degrees of Hazard) Regulations 2001.
HSNO Classifications
3.1B, 6.1E, 6.3A, 6.4A, 6.5A, 6.5B, 6.9B, 9.1D HSNO Approval Number: HSR002662 Hazard and Precautionary Statements: Hazard: Highly flammable liquid and vapour. May be harmful if swallowed. May be harmful in contact with skin. May be harmful if inhaled. May be harmful if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause allergic skin reaction. May cause damage to organs. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life.
Prevention
Read Safety Data Sheet before use. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wear protective gloves, eye and face protection. Keep out of reach of children. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid breathing dust/fume/gas/mist/vapours/spray. In case of inadequate ventilation wear respiratory protection. Contaminated work clothing should not be allowed out of the workplace. Avoid release into the environment.
Response
If medical advice is needed, have product container or label at hand. Call a Poison Centre or doctor/physician if you feel unwell. Do NOT induce vomiting. If swallowed: Do NOT induce vomiting. If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. If inhaled: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a Poison Centre or doctor/physician. If on Skin (or hair) Wash with plenty of soap and water Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: get medical advice/attention. Use a cleansing agent on skin. In Case of Fire: Dry chemical powder, carbon dioxide, foam, water spray, sand or earth. Do not use water jet. Product will float on water.
Storage
Store in a well ventilated place. Keep cool. Store locked up.
Disposal
Recycle wherever possible. Bury residue in an authorised landfill. Recycle containers if possible If not possible, dispose of in an authorised landfill. Containers may still present a chemical hazard/danger when empty. If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill. Contact appropriate Waste Management Company for guidance and disposal options in your area. Where possible retain label warnings and MSDS and observe all notices pertaining to the product.