NYPRO BLUE

Hazardous Ingredients

OSHA THIS PRODUCT IS A MELTED COMPOUND BLEND OF RESIN, ADDITIVES AND OR COLORANTS CONSIDERED TO BE NON-HAZARDOUS CAS # 13463-67-7 CAS # 147-148 CAS# 147-14-8 CAS # 2744-50-5 CAS# 357-05-1 CAS # PROPRIETARY CAS# 9003-56-9 CAS # 9003-54-7 CAS#@ SECTION Ill - PHYSICAL DATA Boiling Point N/A Vapor Pressure (mm Hg): NEGLIGIBLE Vapor Density (Air=1) NEGLIGIBLE Water Solubility (%) INSOLUBLE Specific Gravity (Water=1): APPROX 1 Melting Point 200-230 C

Appearance/Odor

Color SOLID PELLET, NEGLIGIBLE ODOR, COLOR VARIES BY PRODUCT |_D. SECTION IV - FIRE & EXPLOSION HAZARD AREA Flash Point (Method Used): NOT APPLICABLE Limits (LEL): NOT ESTABLISHED Limits (UEL): NOT ESTABLISHED Flammable Limits NOT ESTABLISHED Extinguishing Media: WATER SPRAY AND FOAM. WATER IS THE BEST EXTINGUISHING MEDIUM BECAUSE OF ITS COOLING CAPACITY Specific Fire Fighting Procedures: APPROVED PRESSURE DEMAND BREATHING APPARATUS SHOULD BE USED TO PROTECT AGAINST POTENTIAL HARMFULL AND/OR IRRITATING FUME Unusual Fire Explosion Hazards SECONDARY OPERATIONS SUCH AS GRINDING AND SANDING MAY PRODUCE A DUST EXPLOSION HAZARD. USE HOUSEKEEPING ACTIVITIES TO PREVENT DUST ACCUMULATIONS AND CONTROL IGNITION SOURCES & STATIC ELECTRICITY SECTION V - REACTIVITY DATA Conditions To Avoid: PROLONGED EXPOSURE TO MELT TEMPERATURES EXCEEDING WHAT IS NEEDED TO MELT THE PRODUCT (TO REDUCE FUMES) Materials To Avold: INCOMPATIBLE WITH OXIDIZING AGENTS By Products: THERMAL DECOMPOSITION AND BURNING MAY PRODUCE CARBON MONOXID Hazardous Polymerization: Will not Occur SECTION Vi - HEALTH HAZARD DATA Inhalation: PELLET INHALATION IS UNLIKELY DUE TO PHYSICAL FORM Skin: PELLETS NOT LIKELY TO CAUSE SKIN IRRITATION. MOLTON PLASTIC CAN CAUSE SEVERE BURNS AND FUMES MAY CAUSE SKIN IRRITATION Ingestion; SMALL AMOUNTS, IF SWALLOWED, ARE NOT EXPECTED TO CAUSE INJURY

Health hazards

(Acute and Chronic) N/A Carcinogenicity NTP? IARC Monographs

Medical Conditions Generally Aggravated by Exposure

PRE-EXISTING ALLERGIES OR ECZEMA Emergency and First Aid Procedures: FLUSH EYES WITH WATER. WIPE SKIN WITH DRY TOWEL, THEN WASH WITH SOAP AND WATER. IF INHALED, REMOVE TO FRESH AIR. IF SWALLOWED GIVE 2-3 GLASSES OF WATER. DON'T INDUCE VOMITTING SECTION Vil - PRECAUTIONS FOR SAFE HANDLING & USE Steps to be taken in case of spill or release of materials. SWEEP OR VACUUM MATERIAL AND PLACE IN A PROPER CONTAINER FOR DISPOSAL OR RECOVERY Waste Disposal Method LANDFILL OR INCINERATE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REQUIREMENTS. COLLECTED PROCESSING FUME/ASH SHOULD BE TESTED Handling and Storage Precautions PREVENT CONTACT WITH SKIN AND EYES, USE GOOD HYGIENE PRACTICES. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE & DURING TRANSPORT Other Precautions: DANGER, EXPLOSION RISK. ALWAYS GROUND PACKAGE BEFORE EMPTYING. MOLTEN PURGINGS SHOULD BE KEPT SMALL TO ALLOW FOR QUICKER COOLING SECTION Vill - CONTROL MEASURES Respiratory Protection NIOSH APPROVED REGULATOR Ventilation: Local Exhaust: RECOMMENDED Mechanical: ACCEPTABLE Special: Other: Protective Gloves: GLOVES Eye Protection: SAFETY GLASSES OR GOGGLES Other Protective Clothing or Equipment WEAR COVERALLS FOLLOW GOOD INDUSTRIAL WORKPLACE PRACTICES. AVOID UNNECESSARY CONTACT, WASH THROUGHLY AFTER HANDLING AND BEFORE MEALS - ADDITIONAL INFORMATION TOXIC SUBSTANCE CONTROL ACT (TSCA) This act requires that all chemicals imported, produced, or used in the U.S manufacture be registered in the Chemical Substance inventory. This product contains the following chemicals therein registered. All items on TSCA Inventory. SUPER FUND AMENDMENT REAUTHORIZATION ACT (SARA TITLE Ill, SECTION 313) SUPPLIER NOTIFICATION This product contains the following chemicals subject to the reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 & 40 CFR 372