Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
General Information
Revision date
2015-05-29
Product name
Urethane Injection Part A
CAS No.
101-68-8
supplier name
Polyguard Products, Inc
Emergency telephone
1-800-424-9300 International 1-703-527-3887
Icons in SDS
Company Information
company name
Polyguard Products, Inc
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
OSHA OSHA/HCS status : This material is considered hazardous by the OSHA Hazardous Communications Standard (49CFR1910.1200).
2.1 Classification of the substance or mixture
Acute toxicity: Inhalation- Category 4 Skin Corrosion/Irritation- Category 2 Serious Eye Damage/Eye Irritation- Category 2B. Respiratory Sensitization- Category 1 Skin Sensitization- Category 1 Specific target organ toxicity ( single exposure) (Respiratory Tract irritation – Category 3
Signal word
Danger
Hazard statements
Harmful if inhaled. Causes skin and eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause respiratory irritation.
Prevention
Wear protective gloves and clothing. Wear eye or face protection. Where proper respiratory protection. Use only outdoors or in well ventilated area. Avoid breathing vapor. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the work place.
Response
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. If experiencing respiratory symptoms Call a POISON CENTER or physician. IF ON SKIN Wash with plenty of soap and water. Take off contaminated clothing. Wash contaminated clothing before reuse. Discard contaminated shoes. If skin irritation or redness or burning sensation develop after washing: Get medical attention. IF IN EYES; Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Materials containing MDI may react with the moisture in the eye forming a thick material which might be difficult to wash from eyes. Get medical attention. If swallowed: rinse mouth with water. Do not induce vomiting. Seek medical attention.
Storage
Store locked up. Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
2.3 Other hazards
None known
