Note: Ingredients listed on restricted chemical lists
EC/CAS
618-561-0/9046-10-0
Name of the chemical
Poly(propyleneglycol)diamine
Concentration
50-75 %
EC/CAS
270-877-4/68479-98-1
Name of the chemical
Diethylmethylbenzenediamine
Concentration
20-25% 00-0
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10% 00-2
EC/CAS
215-609-9/1333-86-4
Name of the chemical
carbon black
Concentration
0.1-0.25 %
General Information
Revision date
2023-12-10
Product name
TECNOCOAT P2049 /B
1.2.1 Relevant identified uses
Poliureic membrane
1.2.2. Uses advised against
Data not available
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996-6666
Icons in SDS
Company Information
company name
Polyglass U.S.A. Inc
e-mail address of the competent person responsible for the Safety Data Sheet
RDProductSafety@mapei.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H312, H314, H318, H351, H373, H401, H411
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Acute toxicity (oral), Category 4 Harmful if swallowed. Acute toxicity (dermal), Category 4 Harmful in contact with skin. Skin corrosion, Category 1B Causes severe skin burns and eye damage. Serious eye damage, Category 1 Causes serious eye damage. Carcinogenicity, Category 2 Suspected of causing cancer. Specific target organ toxicity following repeated exposure, May cause damage to organs through prolonged or repeated Category 2 exposure. Acute aquatic hazard, category 2 Toxic to aquatic life Chronic (long term) aquatic hazard, category 2 Toxic to aquatic life with long lasting effects.
Long term hazards
aquatic hazard, category 2 Toxic to aquatic life with long lasting effects
2.2 Label elements
Hazard pictograms and Signal Word Danger
Hazard statements
H302 Harmful if swallowed. H312 Harmful in contact with skin. H314 Causes severe skin burns and eye damage. H318 Causes serious eye damage. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure. H401 Toxic to aquatic life H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe mist/vapours/spray. P264 Wash hands thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P301+P312 IF SWALLOWED: Immediately call a POISON CENTER/doctor/… if you feel unwell. P301+P330+P33 1 IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P302+P352 IF ON SKIN: Wash with plenty of water/… P303+P361+P35 3 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P33 8 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P310 Immediately call a POISON CENTER. P314 Get medical advice/attention if you feel unwell. P321 Specific treatment (see supplementary instructions on this label). P362+P364 Take off contaminated clothing and wash it before reuse. P391 Collect spillage. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Ingredient(s) with unknown acute toxicity
None Hazards not otherwise classified identified during the classification process: None This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)