Note: Ingredients listed on restricted chemical lists
EC/CAS
232-489-3/8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
20-25% 00-4
EC/CAS
265-199-0/64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
5-10% 00-4
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.49-1%
General Information
Revision date
2023-05-15
Product name
POLYPLUS 35
1.2.1 Relevant identified uses
Adhesive
supplier name
Polyglass U.S.A. Inc
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996- 6666
Icons in SDS
Company Information
company name
Polyglass U.S.A. Inc
e-mail address of the competent person responsible for the Safety Data Sheet
info@polyglass.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H340, H350, H412
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Flammable Liquids — Category 3 Flammable liquid and vapour. Skin irritation, Category 2 Causes skin irritation. Eye irritation, Category 2A Causes serious eye irritation. Germ cell mutagenicity, Category 1B May cause genetic defects if inhaled, in contact with skin and if swallowed. Carcinogenicity, Category 1A May cause cancer if inhaled, in contact with skin and if swallowed. Chronic (long-term) aquatic hazard - Category 3 Harmful to aquatic life with long lasting effects.
Long term hazards
aquatic hazard - Category 3 Harmful to aquatic life with long lasting effects
2.2 Label elements
Hazard pictograms and Signal Word Danger
Hazard statements
H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H340 May cause genetic defects if inhaled, in contact with skin and if swallowed. H350 May cause cancer if inhaled, in contact with skin and if swallowed. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P242 Use non-sparking tools. P243 Take action to prevent static discharges. P264 Wash skin thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P321 Specific treatment (see supplementary instructions on this label). P332+P313 If skin irritation occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire, use a dry powder fire extinguisher to extinguish. P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Other hazards
None
Ingredient(s) with unknown acute toxicity
None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard)