Note: Ingredients listed on restricted chemical lists
EC/CAS
201-297-1/80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
25-50% 00-6
EC/CAS
203-080-7/103-11-7
Name of the chemical
acrylic acid, 2-ethylhexyl ester
Concentration
10-20% 00-7
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10% 00-2
General Information
Revision date
2023-03-15
Product name
POLYGLASS PMMA LIGHT TRAFFIC SMOOTH (LTS) SURFACE
Product name
POLYGLASS PMMA LIGHT TRAFFIC SMOOTH (LTS) SURFACE
Identification on the label/Trade name
POLYGLASS PMMA LIGHT TRAFFIC SMOOTH (LTS) SURFACE FINISH
1.2.1 Relevant identified uses
Coating
supplier name
Polyglass U.S.A. Inc
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996- 6666
Icons in SDS
Company Information
company name
Polyglass U.S.A. Inc
e-mail address of the competent person responsible for the Safety Data Sheet
info@polyglass.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H335, H402
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Flammable Liquids — Category 2 Highly flammable liquid and vapour. Skin irritation, Category 2 Causes skin irritation. Skin Sensitization, Category 1B May cause an allergic skin reaction. Specific target organ toxicity following single exposure, Category May cause respiratory irritation. 3 Acute (short-term) aquatic hazard - Category 3 Harmful to aquatic life
2.2 Label elements
Pictograms and Signal Words Danger
Hazard statements
H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H402 Harmful to aquatic life
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P242 Use non-sparking tools. P243 Take action to prevent static discharges. P261 Avoid breathing mist/vapours/spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing must not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P313 IF exposed or concerned: Get medical advice/attention. P312 Call a doctor if you feel unwell. P321 Specific treatment (see supplementary instructions on this label) P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire, use a dry powder fire extinguisher to extinguish. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Other hazards
None
Ingredient(s) with unknown acute toxicity
None This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)
