Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
10-20% 00-2
General Information
Revision date
2022-09-08
Product name
POLYBRITE 95.1
1.2.1 Relevant identified uses
Coating
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996- 6666
Icons in SDS
Company Information
company name
Polyglass U.S.A. Inc
e-mail address of the competent person responsible for the Safety Data Sheet
info@polyglass.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H304, H315, H317, H319, H335, H351
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Flammable Liquids — Category 3 Flammable liquid and vapour. Skin irritation, Category 2 Causes skin irritation. Eye irritation, Category 2A Causes serious eye irritation. Skin Sensitization, Category 1 May cause an allergic skin reaction. Carcinogenicity, Category 2 Suspected of causing cancer if inhaled, in contact with skin and if swallowed. Specific target organ toxicity following single exposure, Category May cause respiratory irritation. 3 Aspiration hazard, Category 1 May be fatal if swallowed and enters airways.
Aspiration hazard
Category 1 May be fatal if swallowed and enters airways
2.2 Label elements
Pictograms and Signal Words Danger
Hazard statements
H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H351 Suspected of causing cancer if inhaled, in contact with skin and if swallowed.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P261 Avoid breathing mist/vapours/spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P312 Call a POISON CENTER if you feel unwell. P321 Specific treatment (see supplementary instructions on this label) P331 Do NOT induce vomiting. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire, use a dry powder fire extinguisher to extinguish. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Ingredient(s) with unknown acute toxicity
None Hazards not otherwise classified identified during the classification process: None This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)