POLYBRITE 90.2

Hazard statements (CLP)

H227, H317, H350, H372

Code

Statements

H227

Combustible liquid

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Flammable Liquids — Category 4 Combustible liquid Skin Sensitization, Category 1B May cause an allergic skin reaction. Carcinogenicity, Category 1A May cause cancer if inhaled, in contact with skin and if swallowed. Specific target organ toxicity following repeated exposure, Causes damage to organs through prolonged or repeated exposure if Category 1 inhaled, in contact with skin and if swallowed.

2.2 Label elements

Hazard pictograms and Signal Word Danger

Hazard statements

H227 Combustible liquid H317 May cause an allergic skin reaction. H350 May cause cancer if inhaled, in contact with skin and if swallowed. H372 Causes damage to organs through prolonged or repeated exposure if inhaled, in contact with skin and if swallowed.

Precautionary statements

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe mist/vapours/spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P308+P313 IF exposed or concerned: Get medical advice/attention. P314 Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire, use a dry powder fire extinguisher to extinguish. P403 Store in a well-ventilated place. P501 Dispose of contents/container in accordance with applicable regulations.

Other hazards

None

Ingredient(s) with unknown acute toxicity

None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard) This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)