Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10% 00-2
EC/CAS
209-136-7/556-67-2
Name of the chemical
D4
Concentration
2.5-5% 00-1
General Information
Revision date
2022-07-06
Product name
POLYBRITE 90.1
1.2.1 Relevant identified uses
Coating
supplier name
Polyglass U.S.A. Inc
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996- 6666
Icons in SDS
Company Information
company name
Polyglass U.S.A. Inc
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H227, H315, H317, H319, H335, H351, H361, H412
Hazard statements
Code
Statements
H227
Combustible liquid
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Flammable Liquids — Category 4 Combustible liquid Skin irritation, Category 2 Causes skin irritation. Eye irritation, Category 2A Causes serious eye irritation. Carcinogenicity, Category 2 Suspected of causing cancer if inhaled, in contact with skin and if swallowed. Reproductive toxicity, Category 2 Suspected of damaging fertility or the unborn child if inhaled, in contact with skin and if swallowed. Specific target organ toxicity following single exposure, Category May cause respiratory irritation. 3 Chronic (long-term) aquatic hazard - Category 3 Harmful to aquatic life with long lasting effects. Skin Sensitization, Category 1 May cause an allergic skin reaction.
Long term hazards
aquatic hazard - Category 3 Harmful to aquatic life with long lasting effects. Skin Sensitization, Category 1 May cause an allergic skin reaction
2.2 Label elements
Pictograms and Signal Words Warning
Hazard statements
H227 Combustible liquid H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H351 Suspected of causing cancer if inhaled, in contact with skin and if swallowed. H361 Suspected of damaging fertility or the unborn child if inhaled, in contact with skin and if swallowed. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing mist/vapours/spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P312 Call a doctor if you feel unwell. P321 Specific treatment (see supplementary instructions on this label) P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire, use a dry powder fire extinguisher to extinguish. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Other hazards
None
Ingredient(s) with unknown acute toxicity
None This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)