Note: Ingredients listed on restricted chemical lists
EC/CAS
232-489-3/8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
10-20% 00-4
EC/CAS
202-049-5/91-20-3
Name of the chemical
Naphthalene,3
Concentration
1-2.5% 00-2
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.49-1%
EC/CAS
265-199-0
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
00-4
General Information
Revision date
2025-03-20
Product name
PG 350 LV
1.2.1 Relevant identified uses
Bituminous adhesive solvent based
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996- 6666
Icons in SDS
Company Information
company name
Polyglass U.S.A. Inc
e-mail address of the competent person responsible for the Safety Data Sheet
RDProductSafety@mapei.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H319, H350, H372, H401, H412
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Flammable Liquids — Category 3 Flammable liquid and vapour. Eye irritation, Category 2A Causes serious eye irritation. Carcinogenicity, Category 1A May cause cancer if inhaled, in contact with skin and if swallowed. Specific target organ toxicity following repeated exposure, Causes damage to organs through prolonged or repeated exposure if Category 1 inhaled, in contact with skin and if swallowed. Acute aquatic hazard, category 2 Toxic to aquatic life Chronic (long term) aquatic hazard, category 3 Harmful to aquatic life with long lasting effects.
Long term hazards
aquatic hazard, category 3 Harmful to aquatic life with long lasting effects
2.2 Label elements
Hazard pictograms and Signal Word Danger
Hazard statements
H226 Flammable liquid and vapour. H319 Causes serious eye irritation. H350 May cause cancer if inhaled, in contact with skin and if swallowed. H372 Causes damage to organs through prolonged or repeated exposure if inhaled, in contact with skin and if swallowed. H401 Toxic to aquatic life H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P260 Do not breathe mist/vapours/spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P273 Avoid release to the environment. P280 Wear protective gloves/clothing and eye/face protection. P303+P361+P35 3 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P33 8 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P314 Get medical advice/attention if you feel unwell. P337+P313 If eye irritation persists: Get medical advice/attention. P370+P378 In case of fire, use a dry powder fire extinguisher to extinguish. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/container in accordance with applicable regulations.
Ingredient(s) with unknown acute toxicity
None Hazards not otherwise classified identified during the classification process: None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard)