Note: Ingredients listed on restricted chemical lists
EC/CAS
232-475-7/8050-09-7
Name of the chemical
Rosin
Concentration
60.0%
General Information
Revision date
2015-05-21
Product name
Vinsol XT
1.2.1 Relevant identified uses
Asphalt emulsifier for anionic, slow setting emulsions for paving, surfacing, and sealing applications
1.2.2. Uses advised against
No further relevant information available
Emergency telephone
1-703-527-3887
Icons in SDS
Company Information
company name
Pinova, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
MSDS@pinovasolutions.com, msds@pinovasolutions.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H335
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification of the substance or mixture GHS07 Skin Sens. 1 H317 May cause an allergic skin reaction STOT SE 3 H335 May cause respiratory irritation Combustible Dust May form combustible dust concentrations in air Classification according to Directive 67/548/EEC or Directive 1999/45/EC Information concerning particular hazards for human and environment DANGER! HOT MOLTEN product: Burns may cause irreversible eye injury and blindness. Causes skin burns Inhalation of smoke or fumes may cause throat discomfort, coughing, or breathing difficulty. Product may burn if ignited WARNING! Solid product at ambient temperature. Static charges generated by emptying package in or near flammable vapors may cause a flash fire. May form flammable dust-air mixtures May cause eye irritation by mechanical abrasion. May cause skin irritation by mechanical abrasion Inhalation of dust may cause respiratory tract irritation. May cause allergic skin reaction (sensitization) in susceptible individuals POTENTIAL HEALTH EFFECTS Prolonged exposure to smoke or fumes generated by heating this product may cause respiratory irritation with throat discomfort, coughing, or breathing difficulty. Repeated exposure may lead to respiratory sensitization (asthma) in susceptible individuals Refer to SDS Section 8, Exposure Controls/Personal Protection, for further information Refer to Section 5 for Hazardous Combustion Products, and Section 10 for Hazardous Decomposition/ Hazardous Polymerization Products The product has to be labeled due to the calculation procedure of international guidelines Contd. of page 1) Classification system The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data
2.2 Label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07
Hazardous Ingredients
VINSOL®, Pulverized
Hazard statements
H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. May form combustible dust concentrations in air.
Precautionary statements
P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P234 Keep only in original container. P243 Take precautionary measures against static discharge. P261 Avoid breathing dust/fume/gas/mist/vapors/spray P262 Do not get in eyes, on skin, or on clothing. P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves / eye protection. P284 In case of inadequate ventilation wear respiratory protection. P301+P312 If swallowed: Call a doctor if you feel unwell. P301+P330+P331 If swallowed: Rinse mouth. Do NOT induce vomiting. P302+P352 If on skin: Wash with plenty of soap and water. P304+P312 IF INHALED: Call a doctor if you feel unwell. P304+P341 If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P314 Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P363 Wash contaminated clothing before reuse. P402+P404 Store in a dry place. Store in a closed container. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents/container in accordance with local/regional/national/ international regulations.
Classification system
· NFPA ratings (scale 0 - 4) Health = 1 1 Fire = 1 1 0 Reactivity = 0 (Contd. of page 2) · HMIS-ratings (scale 0 - 4) HEALTH 1 Health = 1 FIRE 1 Fire = 1 REACTIVITY 0 Reactivity = 0
PBT Substances
Not applicable
vPvB Substances
Not applicable
2.1 Classification of the substance or mixture
GHS07 Skin Sens. 1 H317 May cause an allergic skin reaction. STOT SE 3 H335 May cause respiratory irritation. Combustible Dust May form combustible dust concentrations in air. · Classification according to Directive 67/548/EEC or Directive 1999/45/EC · Information concerning particular hazards for human and environment: DANGER! HOT MOLTEN product: Burns may cause irreversible eye injury and blindness. Causes skin burns. Inhalation of smoke or fumes may cause throat discomfort, coughing, or breathing difficulty. Product may burn if ignited. WARNING! Solid product at ambient temperature. Static charges generated by emptying package in or near flammable vapors may cause a flash fire. May form flammable dust-air mixtures. May cause eye irritation by mechanical abrasion. May cause skin irritation by mechanical abrasion. Inhalation of dust may cause respiratory tract irritation. May cause allergic skin reaction (sensitization) in susceptible individuals. POTENTIAL HEALTH EFFECTS Prolonged exposure to smoke or fumes generated by heating this product may cause respiratory irritation with throat discomfort, coughing, or breathing difficulty. Repeated exposure may lead to respiratory sensitization (asthma) in susceptible individuals. Refer to SDS Section 8, Exposure Controls/Personal Protection, for further information. Refer to Section 5 for Hazardous Combustion Products, and Section 10 for Hazardous Decomposition/ Hazardous Polymerization Products. The product has to be labeled due to the calculation procedure of international guidelines. (Contd. of page 1) · Classification system: The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data.