Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 19 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
<=90.9
EC/CAS
72623-86-0
Name of the chemical
Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating light vacuum gas oil and heavy vacuum gas oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30 and produces a finished oil having a viscosity of approximately 15 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
<=10
EC/CAS
64742-70-7
Name of the chemical
Paraffin oils (petroleum), catalytic dewaxed heavy; Base oil — unspecified (A complex combination of hydrocarbons obtained from a catalytic dewaxing process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 19 10-6 m2.s-1 at 40 °C.)
Concentration
0.44-0.89
EC/CAS
64742-56-9
Name of the chemical
Distillates (petroleum), solvent-dewaxed light paraffinic
Concentration
0.44-0.89
EC/CAS
64742-65-0
Name of the chemical
Distillates (petroleum), solvent-dewaxed heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by removal of normal paraffins from a petroleum fraction by solvent crystallisation. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of not less than 19 10-6 m2.s-1 at 40 °C.)
Concentration
0.44-0.89
General Information
Revision date
2023-07-18
Product name
FVP 10W-40 Conventional Motor Oil - 5 Quart
Product Synonyms
Engine oil, lubricant
Manufacturer Name
Motor Parts
Emergency telephone
+1-703-527-3887, 1-800-424-9300
Icons in SDS
Company Information
company name
Pinnacle Oil Holdings, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
sds@pinnoil.com
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification
Hazard statements
Not classified.
Further information
No information available. (M)SDS Number Page 1 / 10
2.1 Classification of the substance or mixture
This product is not considered hazardous by either the US 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) or the Canadian Workplace Hazardous Material Information System (WHMIS 2015).