Engineered Wood I-Joists

2.1 Classification of the substance or mixture

This product is a manufactured article. GHS classification and labeling are not applicable to product in purchased form. The hazards indicated in this document apply only when this product is cut, drilled, or modified in such a way that dust particles are released. Skin Irrit. 2 Eye Irrit. 2B Carc. 1A STOT SE 3 Comb. Dust

Hazard pictograms

GHS07 GHS08

Signal word

Danger

Hazard statements

Causes skin irritation (wood dust). Causes eye irritation (wood dust). May cause cancer by inhalation (wood dust). May cause respiratory irritation (wood dust). May form combustible dust concentrations in air (if sawn, drilled, or sanded).

Precautionary statements

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust. Wash hands, forearms and face thoroughly after sawing, drilling, or sanding. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection if sawing, drilling, or sanding. If exposed or concerned Get medical advice/attention. If on skin Wash with plenty of water Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Sawing, drilling, or sanding of product must be done in a well-ventilated place.

2.3 Other hazards

No additional information available 2.4. Unknown acute toxicity Not applicable 07/07/2017