Engineered Wood I-Joists

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

This product is a manufactured article. GHS classification and labeling are not applicable to product in purchased form. The hazards indicated in this document apply only when this product is cut, drilled, or modified in such a way that dust particles are released. Skin Irrit. 2 Eye Irrit. 2B Carc. 1A STOT SE 3 Comb. Dust

Signal word

Danger

Hazard statements

May form combustible dust concentrations in air if sawn, drilled, or sanded Causes skin irritation (Wood dust) Causes eye irritation (Wood dust) May cause respiratory irritation (Wood dust) May cause cancer by inhaltion (Wood dust) 08/10/2022 EN (English) Page 1

Precautionary statements

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapours/spray. Wash hands, forearms and face thoroughly after handling after sawing, drilling or sanding. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection if sawing, drilling or sanding. If on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. Call a poison center or doctor if you feel unwell. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Sawing, drilling or sanding of product must be done in a well-ventilated place.

Other hazards which do not result in classification

No additional information available 2.4. Unknown acute toxicity Not applicable