Note: Ingredients listed on restricted chemical lists
EC/CAS
247-722-4/26471-62-5
Name of the chemical
m-Tolylidendiisocyanat
Concentration
>=70-<90 >=0.25-<1
EC/CAS
204-881-4/128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
>=0.1% >=0.1-<0.25
General Information
Revision date
2024-02-01
Product name
PICS PU SEALER
1.2.1 Relevant identified uses
Solvent-borne coatings -
supplier name
PICS Ltd
Emergency telephone
+44 (0) 1635 202224
Icons in SDS
Company Information
company name
PICS Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
Info@picsuk.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H304, H312, H312+H332, H315, H319, H332, H334, H335, H373, H412, H413
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Classification (GB CLP) Flammable liquids, category 3; H226: Flammable liquid and vapour Acute toxicity, category 4; H332: Harmful if inhaled Acute toxicity, category 4; H312: Harmful in contact with skin Skin irritation, category 2; H315: Causes skin irritation Eye irritation, category 2; H319; Causes serious eye irritation, Respiratory sensitisation, category 1; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled Specific target organ toxicity – single exposure, category 3, respiratory system; H335: May cause respiratory irritation Specific target organ toxicity – repeated exposure, category 2; H373: May cause damage to organs through prolonged repeated exposure Aspiration hazard, category 1; H304: May be fatal if swallowed and enters airways Long-term (chronic) aquatic hazard, category 3; H413: Harmful to aquatic life with long lasting effects
2.1 Classification of the substance or mixture
Classification (GB CLP) - Flammable liquids, category 3; H226: Flammable liquid and vapour. - Acute toxicity, category 4; H332: Harmful if inhaled. - Acute toxicity, category 4; H312: Harmful in contact with skin. - Skin irritation, category 2; H315: Causes skin irritation. - Eye irritation, category 2; H319; Causes serious eye irritation, - Respiratory sensitisation, category 1; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. - Specific target organ toxicity – single exposure, category 3, respiratory system; H335: May cause respiratory irritation. - Specific target organ toxicity – repeated exposure, category 2; H373: May cause damage to organs through prolonged repeated exposure. - Aspiration hazard, category 1; H304: May be fatal if swallowed and enters airways. - Long-term (chronic) aquatic hazard, category 3; H413: Harmful to aquatic life with long lasting effects.
Hazard pictograms
-
Signal word
Danger -
Hazard statements
H226 – Flammable liquid and vapour. H304 – May be fatal if swallowed and enters airways. H312 + H332 – Harmful in contact with skin or if inhaled. H315 – Causes skin irritation. H319 – Causes serious eye irritation. H334 – May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 – May cause respiratory irritation. H373 – May cause damage to organs through prolonged or repeated exposure. H412 – Harmful to aquatic life with long lasting effects. -
Prevention
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 – Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. -
Response
P301 + P310 – IF SWALLOWED: Immediately call POISON CENTRE/ doctor. Datasheet Number PICS PU Sealer - v1.0.0 1 P304 + P341 + P312 – IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE/ doctor if you feel unwell. P331 – Do NOT induce vomiting. P342 + P311 – If experiencing respiratory symptoms: Call a POISON CENTRE/ doctor. P370 + P378 – In case for fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. - Hazardous components that may be listed on the label: Reaction mass of ethylbenzene and xylene. m-tolylidene diisocyanate.
2.3 Other hazards
- This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.