Quintolubric 818-02

Phillips 66 Lubricants

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

Note: Ingredients listed on restricted chemical lists

EC/CAS

141-43-5

Name of the chemical

2-aminoethanol

Concentration

<5

EC/CAS

66204-44-2

Name of the chemical

3,3′-Methylenebis[5-methyloxazolidine]

Concentration

<5

Listed in

General Information

Product name

Quintolubric 818-02

Emergency telephone

1-877-445-9198

Icons in SDS

Company Information

company name

Phillips 66 Lubricants

e-mail address of the competent person responsible for the Safety Data Sheet

SDS@P66.com

Section 2

SECTION 2: Hazards identification

(29 CFR 1910.1200) Classified Hazards Hazards Not Otherwise Classified (HNOC)

2.2 Label elements

No classified hazards

2.1 Classification of the substance or mixture

Hazards Not Otherwise Classified (HNOC) This material is not hazardous under the criteria of the Federal OSHA Hazard PHNOC: None known Communication Standard 29CFR 1910.1200. HHNOC: None known Label Elements No classified hazards SECTION 3: Composition/information on ingredients Chemical Name CASRN Concentration¹ Ethanolamine 141-43-5 <5 3,3'-Methylenebis(5-methyloxazolidine) 66204-44-2 <5 Isopropanolamine 78-96-6 <5 ¹ All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. SECTION 4: First aid measures Eye Contact: If irritation or redness develops from exposure, flush eyes with clean water. If symptoms persist, seek medical attention. Skin Contact: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly by washing with mild soap and water or a waterless hand cleaner. If irritation or redness develops and persists, seek medical attention. Inhalation: First aid is not normally required. If breathing difficulties develop, move victim away from source of exposure and into _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ LBPH827740 - Quintolubric® 818-02 Page 1/6 Issue Date: 22-Jun-2016 Status: FINAL LBPH827740 - Quintolubric® 818-02 Issue Date: 22-Jun-2016 Status: FINAL _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ fresh air in a position comfortable for breathing. Seek immediate medical attention. Ingestion: First aid is not normally required; however, if swallowed and symptoms develop, seek medical attention. Most important symptoms and effects, both acute and delayed: Prolonged or repeated contact may dry skin and cause irritation. Inhalation of oil mists or vapors generated at elevated temperatures may cause respiratory irritation. Accidental ingestion can result in minor irritation of the digestive tract, nausea and diarrhea. SECTION 5: Firefighting measures NFPA 704 Hazard Class Health: 0 Flammability: 0 Instability: 0 0 (Minimal) 1 (Slight) 2 (Moderate) 3 (Serious) 4 (Severe) Extinguishing Media: Use extinguishing agent suitable for type of surrounding fire Specific hazards arising from the chemical Unusual Fire & Explosion Hazards: No unusual fire or explosion hazards are expected. If container is not properly cooled, it can rupture in the heat of a fire. Hazardous Combustion Products: Combustion may yield smoke, carbon monoxide, and other products of incomplete combustion. Oxides of sulfur, nitrogen or phosphorus may also be formed. Special protective actions for firefighters: For fires beyond the initial stage, emergency responders in the immediate hazard area should wear protective clothing. When the potential chemical hazard is unknown, in enclosed or confined spaces, a self contained breathing apparatus should be worn. In addition, wear other appropriate protective equipment as conditions warrant (see Section 8). Isolate the hazard area and deny entry to unnecessary and unprotected personnel Stop spill/release if it can be done safely. Move undamaged containers from immediate hazard area if it can be done safely Water spray may be useful in minimizing or dispersing vapors and to protect personnel. Cool equipment exposed to fire with water, if it can be done safely. See Section 9 for Flammable Properties including Flash Point and Flammable (Explosive) Limits SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures: Stay upwind and away from spill/release. Avoid direct contact with material. For large spillages, notify persons down wind of the spill/release, isolate immediate hazard area and keep unauthorized personnel out. Wear appropriate protective equipment, including respiratory protection, as conditions warrant (see Section 8). See Sections 2 and 7 for additional information on hazards and precautionary measures. Environmental Precautions: Stop and contain spill/release if it can be done safely. Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems, and natural waterways. Use water sparingly to minimize environmental contamination and reduce disposal requirements. If spill occurs on water notify appropriate authorities and advise shipping of any hazard. Methods and material for containment and cleaning up: Notify relevant authorities in accordance with all applicable regulations. Immediate cleanup of any spill is recommended. Dike far ahead of spill for later recovery or disposal. Absorb spill with inert material such as sand or vermiculite, and place in suitable container for disposal. If spilled on water remove with appropriate methods (e.g. skimming, booms or absorbents). In case of soil contamination, remove contaminated soil for remediation or disposal, in accordance with local regulations. Recommended measures are based on the most likely spillage scenarios for this material; however local conditions and regulations may influence or limit the choice of appropriate actions to be taken. See Section 13 for information on appropriate disposal. SECTION 7: Handling and storage LBPH827740 - Quintolubric® 818-02 Issue Date: 22-Jun-2016 Status: FINAL _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Precautions for safe handling: Wash thoroughly after handling. Use good personal hygiene practices and wear appropriate personal protective equipment (see section 8). Spills will produce very slippery surfaces. Do not enter confined spaces such as tanks or pits without following proper entry procedures such as ASTM D-4276 and 29CFR 1910.146. Do not wear contaminated clothing or shoes. Conditions for safe storage: Keep container(s) tightly closed and properly labeled. Use and store this material in cool, dry, well-ventilated areas. Store only in approved containers. Keep away from any incompatible material (see Section 10). Protect container(s) against physical damage. SECTION 8: Exposure controls/personal protection Chemical Name ACGIH OSHA Phillips 66 Ethanolamine STEL: 6 ppm TWA: 3 ppm --- TWA: 3 ppm TWA: 6 mg/m3 Note: State, local or other agencies or advisory groups may have established more stringent limits. Consult an industrial hygienist or similar professional, or your local agencies, for further information. Engineering controls: If current ventilation practices are not adequate to maintain airborne concentrations below the established exposure limits, additional engineering controls may be required. Eye/Face Protection: The use of eye protection that meets or exceeds ANSI Z.87.1 is recommended to protect against potential eye contact, irritation, or injury. Depending on conditions of use, a face shield may be necessary. Skin/Hand Protection: The use of gloves impervious to the specific material handled is advised to prevent skin contact. Users should check with manufacturers to confirm the breakthrough performance of their products. Suggested protective materials: Nitrile Respiratory Protection: Where there is potential for airborne exposure above the exposure limit a NIOSH certified air purifying respirator equipped with R or P95 filters may be used. A respiratory protection program that meets or is equivalent to OSHA 29 CFR 1910.134 and ANSI Z88.2 should be followed whenever workplace conditions warrant a respirator's use. Air purifying respirators provide limited protection and cannot be used in atmospheres that exceed the maximum use concentration (as directed by regulation or the manufacturer's instructions), in oxygen deficient (less than 19.5 percent oxygen) situations, or under conditions that are immediately dangerous to life and health (IDLH). Suggestions provided in this section for exposure control and specific types of protective equipment are based on readily available information. Users should consult with the specific manufacturer to confirm the performance of their protective equipment. Specific situations may require consultation with industrial hygiene, safety, or engineering professionals. SECTION 9: Physical and chemical properties Note: Unless otherwise stated, values are determined at 20°C (68°F) and 760 mm Hg (1 atm). Data represent typical values and are not intended to be specifications. Appearance: Yellow-green Flash Point: Not applicable Physical Form: Liquid Test Method: Not applicable Odor: Petroleum Initial Boiling Point/Range: No data Odor Threshold: No data Vapor Pressure: No data pH: 9.8 Partition Coefficient (n-octanol/water) (Kow): No data Vapor Density (air=1): No data Melting/Freezing Point: Upper Explosive Limits (vol % in air): No data Auto-ignition Temperature: No data Lower Explosive Limits (vol % in air): No data Decomposition Temperature: No data Evaporation Rate (nBuAc=1): No data Specific Gravity (water=1): 1.015 @ 60ºF (15.6ºC) Particle Size: Not applicable Bulk Density: 8.47 lbs/gal Percent Volatile: No data Viscosity: 7.7 cSt @ 40°C Flammability (solid, gas): Not applicable Pour Point: 26 °F / -3 °C Solubility in Water: Soluble SECTION 10: Stability and reactivity Reactivity: Not chemically reactive. Chemical stability: Stable under normal ambient and anticipated conditions of use. Possibility of hazardous reactions: Hazardous reactions not anticipated. LBPH827740 - Quintolubric® 818-02 Issue Date: 22-Jun-2016 Status: FINAL _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Conditions to avoid: Extended exposure to high temperatures can cause decomposition. Incompatible materials: Avoid contact with strong oxidizing agents and strong reducing agents. Hazardous decomposition products: Not anticipated under normal conditions of use. SECTION 11: Toxicological information Information on Toxicological Effects Substance / Mixture Acute Toxicity Hazard Additional Information LC50/LD50 Data Inhalation Unlikely to be harmful >5 mg/L (mist, estimated); 5 percent of the mixture consists of ingredient(s) of unknown acute toxicity (inhalation) Dermal Unlikely to be harmful > 2 g/kg (estimated); 5 percent of the mixture consists of ingredient(s) of unknown acute toxicity (dermal) Oral Unlikely to be harmful > 5 g/kg (estimated); 5 percent of the mixture consists of ingredient(s) of unknown acute toxicity (oral) Aspiration Hazard: Not expected to be an aspiration hazard. Skin Corrosion/Irritation: Causes mild skin irritation. Repeated exposure may cause skin dryness or cracking. Serious Eye Damage/Irritation: Causes mild eye irritation. Skin Sensitization: No information available on the mixture, however none of the components have been classified for skin sensitization (or are below the concentration threshold for classification). Respiratory Sensitization: No information available. Specific Target Organ Toxicity (Single Exposure): No information available on the mixture, however none of the components have been classified for target organ toxicity (or are below the concentration threshold for classification). Specific Target Organ Toxicity (Repeated Exposure): No information available on the mixture, however none of the components have been classified for target organ toxicity (or are below the concentration threshold for classification). Carcinogenicity: No information available on the mixture, however none of the components have been classified for carcinogenicity (or are below the concentration threshold for classification). Germ Cell Mutagenicity: No information available on the mixture, however none of the components have been classified for germ cell mutagenicity (or are below the concentration threshold for classification). Reproductive Toxicity: No information available on the mixture, however none of the components have been classified for reproductive toxicity (or are below the concentration threshold for classification). SECTION 12: Ecological information GHS Classification: No classified hazards Toxicity: Not expected to be harmful to aquatic life Persistence and Degradability: Not expected to persist in the environment if spilled or released. LBPH827740 - Quintolubric® 818-02 Issue Date: 22-Jun-2016 Status: FINAL _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Bioaccumulative Potential: Not expected to bioaccumulate in the environment based on its physical properties. Mobility in Soil: Expected to have low mobility in soil and sediments with adsorption being the predominant physical process. Other adverse effects: None anticipated. SECTION 13: Disposal considerations The generator of a waste is always responsible for making proper hazardous waste determinations and needs to consider state and local requirements in addition to federal regulations. This material, if discarded as produced, would not be a federally regulated RCRA "listed" hazardous waste and is not believed to exhibit characteristics of hazardous waste. See Sections 7 and 8 for information on handling, storage and personal protection and Section 9 for physical/chemical properties. It is possible that the material as produced contains constituents which are not required to be listed in the SDS but could affect the hazardous waste determination. Additionally, use which results in chemical or physical change of this material could subject it to regulation as a hazardous waste.This material under most intended uses would become "Used Oil" due to contamination by physical or chemical impurities. Whenever possible, Recycle used oil in accordance with applicable federal and state or local regulations. Container contents should be completely used and containers should be emptied prior to discard. SECTION 14: Transport information U.S. Department of Transportation (DOT) UN Number: Not regulated UN proper shipping name: None Transport hazard class(es): None Packing Group: None Environmental Hazards: This product does not meet the DOT/UN/IMDG/IMO criteria of a marine pollutant Special precautions for user: None Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code: Not applicable SECTION 15: Regulatory information CERCLA/SARA - Section 302 Extremely Hazardous Substances and TPQs (in pounds): This material does not contain any chemicals subject to the reporting requirements of SARA 302 and 40 CFR 372. CERCLA/SARA - Section 311/312 (Title III Hazard Categories) Acute Health Hazard: No Chronic Health Hazard: No Fire Hazard: No Pressure Hazard: No Reactive Hazard: No CERCLA/SARA - Section 313 and 40 CFR 372: This material does not contain any chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372. EPA (CERCLA) Reportable Quantity (in pounds): This material does not contain any chemicals with CERCLA Reportable Quantities. California Proposition 65: This material does not contain any chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm at concentrations that trigger the warning requirements of California Proposition 65. International Hazard Classification Canada: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the SDS contains all the information required by the Regulations. International Inventories LBPH827740 - Quintolubric® 818-02 Issue Date: 22-Jun-2016 Status: FINAL _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ All components are either listed on the US TSCA Inventory, or are not regulated under TSCA. All components are either on the DSL, or are exempt from DSL listing requirements. U.S. Export Control Classification Number: EAR99 SECTION 16: Other information Issue Date: Previous Issue Date: SDS Number Status: 22-Jun-2016 LBPH827740 FINAL Revised Sections or Basis for Revision: New SDS Guide to Abbreviations: ACGIH = American Conference of Governmental Industrial Hygienists; CASRN = Chemical Abstracts Service Registry Number; CEILING = Ceiling Limit (15 minutes); CERCLA = The Comprehensive Environmental Response, Compensation, and Liability Act; EPA = Environmental Protection Agency; GHS = Globally Harmonized System; IARC = International Agency for Research on Cancer; INSHT = National Institute for Health and Safety at Work; IOPC = International Oil Pollution Compensation; LEL = Lower Explosive Limit; NE = Not Established; NFPA = National Fire Protection Association; NTP = National Toxicology Program; OSHA = Occupational Safety and Health Administration; PEL = Permissible Exposure Limit (OSHA); SARA = Superfund Amendments and Reauthorization Act; STEL = Short Term Exposure Limit (15 minutes); TLV = Threshold Limit Value (ACGIH); TWA = Time Weighted Average (8 hours); UEL = Upper Explosive Limit; WHMIS = Worker Hazardous Materials Information System (Canada) Disclaimer of Expressed and implied Warranties: The information presented in this Safety Data Sheet is based on data believed to be accurate as of the date this Safety Data Sheet was prepared. HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTY IS EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OR COMPLETENESS OF THE INFORMATION PROVIDED ABOVE, THE RESULTS TO BE OBTAINED FROM THE USE OF THIS INFORMATION OR THE PRODUCT, THE SAFETY OF THIS PRODUCT, OR THE HAZARDS RELATED TO ITS USE. No responsibility is assumed for any damage or injury resulting from abnormal use or from any failure to adhere to recommended practices. The information provided above, and the product, are furnished on the condition that the person receiving them shall make their own determination as to the suitability of the product for their particular purpose and on the condition that they assume the risk of their use. In addition, no authorization is given nor implied to practice any patented invention without a license.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.