Note: Ingredients listed on restricted chemical lists
EC/CAS
7784-22-7
Name of the chemical
Phosphinic acid, aluminum salt (3:1)
Concentration
N/A
EC/CAS
37640-57-6
Name of the chemical
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, compound with 1,3,5-triazine
Concentration
N/A
General Information
Revision date
2022-07-30
Product name
FRJet filament
1.2.2. Uses advised against
not set
Emergency telephone
Toxicology Information Centre, Na Bojišti 1, Praha; 24-h non-stop: +420-224919293 / +420-224915402
Icons in SDS
Company Information
company name
PharmDr. Vladimír Végh
e-mail address of the competent person responsible for the Safety Data Sheet
info@pharmis.sk
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H373
Hazard statements
Code
Statements
H373
May cause damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
1272/2008 General classification of the mixture: based on the composition and calculation methods of classification the mixture is classified as hazardous in compliance with the Regulation (EC) 1272/2008. However, because of the polymeric form of the product, the release of hazardous compounds is not expected and the mixture does not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which it is placed on the market. In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008. Important
Potential health effects
No adverse effects for human health are expected for the mixture under normal conditions of usage, the mixture is biologically inert. When melted, it can cause serious burns if contacted with skin and eyes. Ingestion of a small amount should not cause any troubles. Inhaling of loosen dust or potential decomposition products of melted/overheated mixture in high concentration can irritate moderately respiratory system and mucous membranes. Important
Environmental effects
No adverse effects in the environment are expected for the mixture; the mixture is almost biologically inert. Within the environment the mixture underlies very slow biological decomposition.
2.1 Classification of the substance or mixture
Classification in accordance with 1272/2008/EC: STOT RE 2 Specific target organ toxicity - repeated exposure, category 2 H373 May cause damage to organs through prolonged or repeated exposure.
Contains
In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008.
Hazard pictograms
In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008.
Signal word
In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008.
Hazard statements
In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008.
Supplemental label elements
In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008. elements for certain mixtures: In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008.
Precautionary statements
In accordance with the Article 1.3.4, Annex I, Regulation (EC) 1272/2008 the mixture does not require a label according to the Regulation (EC) 1272/2008. Other required labeling: not required
Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII; no substances of the mixture in the amount of ≥ 0.1 % are included in the Candidate List of Substances of very high concerns (SVHC).
