Note: Ingredients listed on restricted chemical lists
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2011-06-06
Product name
SERELISA and LACTELISA Kit Stop Solution
1.2.1 Relevant identified uses
This product is a component of several SERELISA and LACTELISA test kits
Icons in SDS
Company Information
company name
Pfizer Australia Pty Ltd
Section 2
Hazard statements
This product is classified as: C, Corrosive. Hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. R34, R38. Causes burns. Irritating to skin
Precautionary statements
S20, S23, S28, S36, S46, S24/25. When using, do not eat or drink. Do not breathe vapours or mists. After contact with skin, wash immediately with plenty of soap and water. Wear suitable protective clothing. If swallowed, contact a doctor or Poisons Information Centre immediately and show this MSDS or label. Avoid contact with skin and eyes.
SUSMP Classification
None allocated
ADG classification
None allocated. Not a Dangerous Good under the ADG Code
UN Number
None allocated EEm E m meeerrrgggeeennncccyyy OOvvveeerrrvvviiieeew O ww Physical Description & colour: Clear colourless liquid. Odour: No odour.
Health hazards
causes burns, skin irritant PPooottteeennntttiiiaaalll P HHeeeaaalllttthhh H EEffffffeeeccctttsss E Inhalation: Short term exposure: Available data indicates that this product is irritating, although unlikely to cause anything more than transient discomfort. If liquid enters nasal passages, it will cause pain and burn nasal membranes. Patients with inhalation burns may develop acute pulmonary oedema. Long Term exposure: No data for health effects associated with long term inhalation. Skin Contact: Short term exposure: Available data indicates that this product is corrosive to the skin. Capable of causing moderate to severe burns with ulceration. Can penetrate to deeper layers of skin, resulting in third degree burns. Corrosion will continue until product is removed or neutralised. Severity depends on concentration and duration of exposure. Burns may not be immediately painful; the onset of pain may be minutes to hours. Long Term exposure: No data for health effects associated with long term skin exposure. Eye Contact: Short term exposure: This product is corrosive to eyes. It will cause severe pain, and corrosion of the eye and surrounding facial tissues. Unless exposure is quickly treated, permanent blindness and facial scarring is likely. Long Term exposure: No data for health effects associated with long term eye exposure. Ingestion: Short term exposure: Significant oral exposure is considered to be unlikely. However, this product is corrosive to the gastrointestinal tract. Capable of causing moderate to severe burns with ulceration. Can penetrate to deeper layers of skin, resulting in third degree burns. Corrosion will continue until product is removed or neutralised. Severity depends on concentration and duration of exposure. Long Term exposure: No data for health effects associated with long term ingestion. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: Sulphuric Acid is classified by NTP as reasonably anticipated to be carcinogenic to humans. See the NTP website for further details. A web address has not been provided as addresses frequently change. IARC: No significant ingredient is classified as carcinogenic by IARC.