HSS Hole Saw

Hazard statements (CLP)

H317, H331, H334, H350, H361f, H400, H411

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

This material is considered hazardous by the OSHA Hazard Communication Standard ( 29 CFR 1910. 1200 ) Emergency overview

Appearance/Odor

Form: solid No data available Classification Acute Toxicity - inhalative - Category 3; Respiratory Sensitizer - Category 1; Sensitization - skin - Category 1; Carcinogenicity - Category 1B; Reproductive toxicity - Category 2; Aquatic toxicity - acute - Category 1; Aquatic toxicity - chronic - Category 2;

Signal word

Danger

Hazard statements

May cause an allergic skin reaction. Toxic if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause cancer. Suspected of damaging fertility. Very toxic to aquatic life. Toxic to aquatic life with long lasting effects.

Precautionary statements

Obtain special instructions before use. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection. IF ON SKIN: Wash with plenty of water/soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF exposed or concerned: Get medical advice/attention. Call a POISON CENTER/doctor. Specific treatment (see ' First aid ' on this label). If skin irritation or rash occurs: Get medical advice/attention. If experiencing respiratory symptoms: Call a POISON CENTER/doctor. Wash contaminated clothing before reuse. Collect spillage. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container to hazardous or special waste collection point.

Additional information

The hazard identification is based on a formalistic procedure as the hazard statements of the ingredients are summarized under section 3. This does not correspond to the hazardousness of the product itself. A greater hazard, in most cases, is the exposure to the dust/fumes from the material being sawed. Most of the dust generated during sawing is from the base material being sawed and the potential hazard from this exposure must be evaluated. This dust may present a fire or dust explosion hazard and may present a serious health hazard.

2.3 Other hazards

Mechanical processing can produce particles and dust. Inhalation of dust may cause irritation of the respiratory system. Dust contact with the eyes can lead to mechanical irritation. see section 11 Toxicological information

2.1 Classification of the substance or mixture

Acute Toxicity - inhalative - Category 3; Respiratory Sensitizer - Category 1; Sensitization - skin - Category 1; Carcinogenicity - Category 1B; Reproductive toxicity - Category 2; Aquatic toxicity - acute - Category 1; Aquatic toxicity - chronic - Category 2; Hazard symbols: Signal word: Danger Hazard statements: May cause an allergic skin reaction. Toxic if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause cancer. Suspected of damaging fertility. Very toxic to aquatic life. Toxic to aquatic life with long lasting effects. Precautionary statements