Note: Ingredients listed on restricted chemical lists
EC/CAS
1344-28-1
Name of the chemical
aluminium oxide
Concentration
<70% <70%
EC/CAS
409-21-2
Name of the chemical
Silicon carbide
Concentration
<60% <60% <55% <50% <45%
EC/CAS
13775-53-6
Name of the chemical
Trisodium hexafluoroaluminate
Concentration
<20% <15%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
< 5 %
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
<1%
EC/CAS
1305-78-8
Name of the chemical
Calcium oxide
Concentration
<0.5% <0.5%
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
< 0.5 %
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
<0.5% <0.4%
EC/CAS
50-00-0
Name of the chemical
Formaldehyde
Concentration
<0.1%
General Information
Revision date
2018-02-02
Product name
Coated Abrasives
1.2.1 Relevant identified uses
Grinding and sanding of different kinds of materials
Emergency telephone
1-800-255-3924
Icons in SDS
Company Information
company name
PFERD CANADA INC
e-mail address of the competent person responsible for the Safety Data Sheet
sales@pferdusa.com, sales@pferdcanada.ca
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) Emergency overview Appearance: Form: solid Color: varying colors Odor: No data available
2.1 Classification of the substance or mixture
Eye Irritation 2A; Carcinogenicity 1A; Toxic to Reproduction (Lactation); Specific Target Organ Toxicity (Repeated Exposure) 1; Aquatic toxicity - chronic 3;
Signal word
Danger
Hazard statements
Causes serious eye irritation. May cause cancer. May cause harm to breast-fed children. Causes damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects.
Precautionary statements
Obtain special instructions before use Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact during pregnancy/while nursing. Wash hands and face thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Store locked up. Dispose of contents/container to hazardous or special waste collection point.
Additional information
The hazard identification is based on a formalistic procedure as the hazard statements of the ingredients are summarizes under section 3. This does not correspond to the hazardousness of the product itself. A greater hazard, in most cases, is the exposure to the dust/fumes from the material or paint/coatings being ground. Most of the dust generated during grinding is from the base material being ground and the potential hazard from this exposure must be evaluated. This dust may present a fire or dust explosion hazard and may present a serious health hazard. Regulatory status This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200) and SIMDUT in Canada.
2.3 Other hazards
Processing, e.g. by cutting, sawing or grinding, can produce particles and dust. Dust contact with the eyes can lead to mechanical irritation. Dust may irritate airways and cause bronchitis symptoms. see section 11: Toxicological information
