Note: Ingredients listed on restricted chemical lists
EC/CAS
231-175-3/7440-66-6
Name of the chemical
Zinc
Concentration
50-100%
EC/CAS
500-033-5/25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
2.5-5%
General Information
Revision date
2012-09-10
Product name
Aerosol 2K Zinkstaubfarbe
1.2.1 Relevant identified uses
Paintwork
Emergency telephone
+49 6269 95 20
Icons in SDS
Company Information
company name
Peter Kwasny GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
labor@kwasny.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H315, H317, H319, H400, H410
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
2.1 Classification of the substance or mixture
Classification
EU Classification
Directive 67/548/EEC or Directive 1999/45/EC Xi; Sensitising R43: May cause sensitisation by skin contact. F+; Extremely flammable R12: Extremely flammable. N; Dangerous for the environment R50/53: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R18: In use, may form flammable/explosive vapour-air mixture. (Contd. on page 2) GB (Contd. of page 1) · Information concerning particular hazards for human and environment: The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. Warning! Pressurized container.
Classification system
The classification is according to the latest editions of the EU-lists, and extended by company and literature data.
2.2 Label elements
Labelling according to EU guidelines: The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. · Code letter and hazard designation of product: Xi Irritant F+ Extremely flammable N Dangerous for the environment
Hazardous Ingredients
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight 700-1100
Hazard statements
12 Extremely flammable. 18 In use, may form flammable/explosive vapour-air mixture. 43 May cause sensitisation by skin contact. 50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Precautionary statements
2 Keep out of the reach of children. 16 Keep away from sources of ignition - No smoking. 23 Do not breathe aerosol. 24 Avoid contact with skin. 29/56 Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. 37 Wear suitable gloves. 46 If swallowed, seek medical advice immediately and show this container or label. 51 Use only in well-ventilated areas.
Special rules for supplemental label elements for certain mixtures
Contains epoxy constituents. See information supplied by the manufacturer. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. · Classification in accordance with Directive 75/324/EEC: Extremely flammable
PBT Substances
Not applicable
vPvB Substances
Not applicable *
