Note: Ingredients listed on restricted chemical lists
General Information
Version
1.1
Revision date
2019-07-31
Product name
1K FillClean Very Low Viscosity (for solvent borne 1K Coatings)
1.2.1 Relevant identified uses
Automotive refinish
Manufacturer Name
Peter Kwasny GmbH
Emergency telephone
352-323-3500
Icons in SDS
Company Information
company name
Peter Kwasny GmbH
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H280, H319
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
H229
Pressurized container: may burst if heated
H280
Contains gas under pressure; may explode if heated
H319
Causes serious eye irritation
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture GHS classification Flam. Aerosol 1 Press. Gas (Liq.) Eye Irrit. 2A Simple Asphy Label elements
Hazard pictograms
GHS02 GHS04 GHS07
Signal word
Danger
Hazard statements
Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes serious eye irritation. May displace oxygen and cause rapid suffocation.
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Wash hands, forearms and face thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
2.3 Other hazards
No additional information available 2.4. Unknown acute toxicity Not applicable 07/31/2019 EN (English) Page 1
2.1 Classification of the substance or mixture
GHS classification Flam. Aerosol 1 Press. Gas (Liq.) Eye Irrit. 2A