Waterborne Latex - (various colors) 100 V.O.C. formula

Hazardous Ingredients

PERCENT ACGIH TLV* OSHA PEL* BY WEIGHT PPM mg./m3 142 Solvent 16.08% 100PPM CAS Number 064742-88-7 Xylene 5.36% 100PPM CAS Number 1330-20-7 Ethyl Benzene 1.07% 100PPM CAS Number 100-41-4 *Threshold *Permissible Limit Value Exposure Limit Section 3 - Physical Data BOILING RANGE: 279 °F VAPOR DENSITY: Heavier than Air. EVAPORATION RATE: Slower than ether. WEIGHT PER GALLON: 7.8 PERCENT VOLATILE BY VOLUME: 38% VAPOR PRESSURE: 5.1 MM Hg@20° MELTING POINT: Not applicable. VOCs: <250 grams/liter SOLUBILITY IN WATER: Insoluble PERCENT ACGIH TLV* OSHA PEL* BY WEIGHT PPM POTASSIUM HYDROXIDE 7-8% 2mg/m CAS Number 1310-58-3 ETHYLENE GLYCOL PHENYL 5-10% Not Available CAS Number 122-99-6 *Threshold *Permissible Limit Value Exposure Limit Section 3 - Physical Data BOILING RANGE: Not Available ADDITLONAL pH INFORMATION 1% aqueous solution=11.5-12.5 EVAPORATION RATE: Slower than ether. WEIGHT PER GALLON: 7.6 PERCENT VOLATILE BY VOLUME: No data DENSITY: .06 g/cm at 25 C (77 F) MELTING POINT: Not applicable. OROR Slightly SOLUBILITY IN WATER: Soluble in cold water. Soluble in hot water

Appearance/Odor

Colored liquid with mineral solvent odor; irritating odor at high concentrations. Section 4 - Hazard Data OSHA CATEGORY:Combustible Class II FLASH POINT: 122°F Tag Closed Cup LEL%:1.0 UEL%: 12.3 To avoid spontaneous combustion, soak oily cloths, brushes, rollers, etc. in water after use or place in a closed metal container away from building and other combustible materials. Dispose of in accordance with local regulations. EXTINGUISHING MEDIA: Foam, CO2, dry chemical. UNUSUAL FIRE OR EXPLOSION HAZARDS: Keep away from heat, sparks, or open flame. SPECIAL FIRE FIGHTING PROCEDURES:Positive pressure self-contained breathing appara- tus (SCBA) should be worn to avoid inhalation of concentrated vapors. Chemical protective clothing is recommended if there may be repeated or prolonged exposure to the liquid or concentrated vapors. Section 5 - First Aid Measures THRESHOLD LIMIT VALUE: See Section II Colorless, transparent Odorless PHYSICAL STATE Solid PH: 1.3 (0.1M solution) VAPOR PRESSURE: < 0.001 mm Hg@ 20 deg C VAPOR DENSITY: 4.3 BOILING POINT: 149-160 deg C(300-320 deg F) FREEZING/MELTING POINT 101.5 deg C (215 deg F) SOLUBILITY (H20): Freely soluble in water SPECIFIC GRAVITY: 1.65 (H20 = 1) SOFTENING POINT: Not available PARTICLE SIZE Not available MOLECULAR WEIGHT: 126.7 BULK DENSITY: Not available CHEMICAL FORMULA: (COOH)2*2H20 Section 4 - Fire and Explosion Hazard Data OSHA CATEGORY: Corrosive Non Combustible FLASH POINT: NO DATA EXTINGUISHING MEDIA: NOT APPLICABLE UNUSUAL FIRE OR EXPLOSION HAZARDS: None Known Clear, light yellow liquid Section 4 - Fire and Explosion Hazard Data FLASH POINT: (Test Method): 100*C° (212*F) Stability………….Stable under normal conditions of use and storage Incompatibility…..Strong acids, strong bases, strong oxidizers, and reducing agents. Special Firefighting Procedures Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA) And full turnout gear, should be worn to avoid inhalation of concentrated vapors. Reacts with most metals producing hydrogen, which is extremely flammable and may explode. Keep container tightly closed.

Principle Routes of Exposure

Dermal, ingestion, inhalation EFFECTS OF OVEREXPOSURE: Acute -Eye or skin contact may cause irritation. Can be irritating to the respiratory tract if inhaled as a mist or concentrated vapor. Inhalation of the vapors, or ingestion of the liquid, can cause systemic toxicity including dizziness, confusion, drowsiness, un-coordination, staggering gait, nausea, headache. Aspiration may also lead to chemical pneumonia Chronic -Reports have associated repeated and prolonged overexposure to solvents with permanent brain damage and nervous system damage 40 STABILITY: (Conditions to avoid) Avoid open flames, welding arcs or other high temperature sources which induce thermal decomposition. Avoid strong oxidants. HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen chloride and very small amounts of phosgene and chlorine. HAZARDOUS POLYMERIZATION: Will not occur. Section 7 - Spill or Leak Procedure STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED SMALL LEAKS Mop up, wipe up, or soak up immediately remove to out-of-doors. LARGE SPILLS: Evacuate area. Contain liquid; transfer to closed metal containers. Keep out of water supplies. DISPOSAL METHOD: When disposing of the unused contents, the preferred options are to send to licensed reclaimer, or to permitted incinerators. Any disposal practice must be in compliance with federal, state and local regulations. Do not dump into sewers, on the ground, or into any body of water. Section 8 - Special Protection Information RESPIRATORY PROTECTION: Use a supplied air respirator when airborne exposure limits are exceeded. VENTILATION: Control airborne concentrations below the exposure guideline. Use only with adequate ventilation. Local exhaust ventilation may be necessary for some operations. Lethal concentrations may exist in areas with poor ventilation. SKIN PROTECTION: For brief contact, no precautions other than clean body-covering clothing should be needed. When prolonged or frequently repeated contact could occur, use protective clothing impervious to this material. Selection of specific items such as gloves, boots, apron, or fully body suit will depend on operation. EYE PROTECTION: Use safety glasses. Where contact with liquid is likely, chemical goggles are recommended. OTHER PROTECTIVE EQUIPMENT: It is suggested that a source of clean water be available in work area for flushing eyes and skin. Section 9 - Special Precautions PRECAUTIONS TO BE TAKEN IN HANDLING OR STORING: Do not store above 125 °F. OTHER PRECAUTIONS: Do not take internally. Do not use in areas of inadequate ventilation. Section 10 - Sara 313 Information CHEMICAL NAME CAS NUMBER % BY WEIGHT Xylene 1330-20-7 5.36% Ethyl Benzene 100-41-4 1.07% PREPARED BY: Regulatory Director, Performance Coatings Inc., Ukiah, California 95482 REFERENCE DATE: March 2003 WARNING Detectable amounts of some chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm may be found in various petroleum products and chemical products you purchase from Performance Coatings Inc., in their vapors, or may result from their use. Use care when handling or using all chemical and petroleum products. THE INFORMATION AND RECOMMENDATIONS CONTAINED HEREIN ARE BASED UPON DATA BELIEVED TO BE CORRECT. HOWEVER, NO GUARANTEE OR WARRANTY OF ANY KIND EXPRESSED OR IMPLIED IS MADE WITH RESPECT TO THE INFORMATION CONTAINED HEREIN. 1st Step Prep MSDS TELEPHONE: (707) 462-3023 PRODUCT CLASS: Cleaning Compound CODE IDENTIFICATION: FSTEP TRADE NAME: Penofin® FIRST STEP PREP EMERGENCY TELEPHONE NUMBERS: FOR CHEMICAL EMERGENCY. Spill, leak, fire, exposure or accident. Call CHEMTREC - Day or Night - 1-800-424-9300. Outside the United States call 202-483-7616. EMERGENCY POISONING TREATMENT INFORMATION: Call collect 24 hours a day. 1-800- 947-2331 DOT SHIPPING NAME: NON-REGULATED Section 2 - Ingredients PERCENT ACGIH TLV* OSHA PEL* BY WEIGHT PPM mg./m3 PPM mg./ m3 Oxalic Acid 99.6% 2mG/M3 1mG/m3 CAS Number *Threshold *Permissible Limit Value Exposure Limit Section 3 - Physical Data Dermal, ingestion, inhalation EFFECTS OF OVEREXPOSURE: INHALATION: Light nose and throat irritation in high concentrations, cough. In case of repeated or prolonged exposure; risk of sore throat, nosebleeds, and chronic bronchitis SKIN CONTACT: Light irritation. In case of repeated contact: risk of dermatitis INGESTION: Severe irritation of the mouth, throat, esophagus and stomach, bloating of stomach, belching, nausea and vomiting EYE CONTACT: Severe irritant-May cause damage EMERGENCY FIRST AID PROCEDURES: INHALATION: Remove the subject from dusty environment. Consult a physician in case of respiratory symptoms SKIN: Promptly remove contaminated clothing and wash with soap and water. Consult a physician in case of persistent pain or redness. EYES: Irrigate immediately with water or saline for at least 10-15 minutes, while keeping eyelids open Consult an ophthalmologist in all cases. INGESTION: Do not induce vomiting. Call a physician immediately and/or transport to emergency facility immediately. NOTE TO PHYSICIAN: No Specific antidote, treat symptomatically Section 6 - Reactivity Data STABILITY: Stable. CONDITIONS TO AVOID: Strong oxidants, heat, electric equipment and open flame. Moisture HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of Carbon HAZARDOUS POLYMERIZATION: Will not occur. Section 7 - Spill or Leak Procedure STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: VACUUM WITH A HEPA FILTER VACUUM, AND WET MOP LARGE SPILLS: VACUUM, WITH A HEPA FILTER VACUUM AND WET MOP SMALL SPILLS: Mop up, wipe ups, or soak up immediately remove to out-to-doors. DISPOSAL METHOD: This product may be disposed down a drain Section 8 - Special Protection Information RESPIRATORY PROTECTION: Use a supplied air respirator when airborne exposure limits are exceeded. Do not use a chemical cartridge respirator. VENTILATION: Control airborne concentrations below the exposure guideline. Use only with adequate ventilation. Local exhaust ventilation may be necessary for some operations. Lethal concentrations may exist in areas with poor ventilation. SKIN PROTECTION: For brief contact, no precautions other than clean body-covering clothing should be needed. When prolonged or frequently repeated contact could occur, use protective clothing impervious to this material. Selection of specific items such as gloves, boots, apron, or fully body suit will depend on operation. EYE PROTECTION: Use safety glasses. Where contact with liquid is likely, chemical goggles are recommended. OTHER PROTECTIVE EQUIPMENT: It is suggested that a source of clean water be available in work area for flushing eyes and skin. Section 9 - Special Precautions PRECAUTIONS TO BE TAKEN IN HANDLING OR STORING: Do not store above 104_F. Store in a dry area away from heat sources. Do not store in a metal container OTHER PRECAUTIONS: Do not take internally. Use with adequate ventilation Vapors will collect in low or poorly ventilated areas. Do not use with spray application equipment containing aluminum, galvanized or metals Section 10 - Sara 313 Information PREPARED BY: Regulatory Director, Performance Coatings Inc., Ukiah, California 95482 REFERENCE PRECAUTIONS: OCTOBER 2006 WARNING Detectable amounts of some chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm may be found in various petroleum products and chemical products you purchase from Performance Coatings Inc., in their vapors, or may result from their use. Use care when handling or using all chemical and petroleum products. THE INFORMATION AND RECOMMENDATIONS CONTAINED HEREIN ARE BASED UPON DATA BELIEVED TO BE CORRECT. HOWEVER, NO GUARANTEE OR WARRANTY OF ANY KIND EXPRESSED OR IMPLIED IS MADE WITH RESPECT TO THE INFORMATION CONTAINED HEREIN. 41 Pro-Tech Stripper MSDS TELEPHONE: (707) 462-3023 PRODUCT CLASS: Cleaning Compound CODE IDENTIFICATION: PTS TRADE NAME: Pro Tech Stripper EMERGENCY TELEPHONE NUMBERS: FOR CHEMICAL EMERGENCY. Spill, leak, fire, exposure or accident. Call CHEMTREC - Day or Night - 1-800-424-9300. Outside the United States call 202-483-7616. EMERGENCY POISONING TREATMENT INFORMATION: Call collect 24 hours a day. 1-800- 947-2331 DOT SHIPPING NAME: Corrosive Liquid, N.O.S., (Potasslum Hydroxide, Dodecylbenzrmesulfonic Acid), Class 8, UN1760, P.G. III

Health hazards

Data THRESHOLD LIMIT VALUE: See Section 2 Data Eye Exposure :Flush immediately with copious amounts of tap water of normal saline (minimum of 15 minutes) Take exposed individual to a health care professional, preferably an ophthalmologist, for further evaluation. Skin Exposure: Wash exposed area with plenty of water. Repeat washing. Remove contaminated clothing and wash thoroughly before reuse. If irritation persists consult a health care professional. Inhalation: If exposure by inhalation is suspected, immediately move exposed individual to fresh air. If individual experiences nausea, headache, dizziness, has difficulty in breathing or is cyanotic, seek a health car professional immediately. Ingestion: DO NOT INDUCE VOMITING. Rinse with copious amounts of water or milk, first. Irrigate the esophagus and dilute stomach contents by slowly giving one to two glasses of water or milk. 42 Avoid giving Alcohol or alcohol related products. In cases where the individual is semi- comatose, comatose or convulsing DO NOT GIVE FLUIDS BY MOUTH. In case of intentional ingestion of the product seek medical assistance immediately; take individual to nearest medical facility. Section 6 - Reactivity Data STABILITY: Stable, under normal conditions of use and storage. INCOMPATIBILITY: strong bases, strong oxidizers, and reducing agents. SPECIAL FIREFIGHTING PROEDURES: Fire fighters should wear pressure self-contained breathing apparatus (SCBA) and full turnout gear. Section 7 - Spill or Leak Procedure