Note: Ingredients listed on restricted chemical lists
EC/CAS
238-455-4/14464-46-1
Name of the chemical
Cristobalit (s. u. TRGS 906)
Concentration
30.0<x<50.0
General Information
Revision date
2022-09-07
Product name
Impress-E Wash Medium
1.2.1 Relevant identified uses
(SU22) professional uses: Public domain (administration, education, entertainment, services, craftsmen); (SU20) Health services;
supplier name
Perfection Plus Ltd
Emergency telephone
0044 (0) 2380 866677, 0044 (0) 230 866 677
Icons in SDS
Company Information
company name
Perfection Plus Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
Regulatory@perfectionplus.com
Section 2
SECTION 2: Hazards identification
1272/2008 Classification of the substance or mixture The product is not classified as hazardous pursuant to the provisions set forth
Other hazards
The hazardous characteristics of the raw materials listed below are in any case lost the moment those substances are mixed with other fluid components, generating the final product, which, in its pasty form, does not generate dust given it is contained within a matrix constituted by silicone oils. Similarly, for the use of the hardened material it is not possible to foresee any processing that will allow the dusting of the components in the environment; same considerations for the disposal of the hardened product. It is therefore reasonable to expect, in normal conditions of use, the impossibility for the operator to inhale any type of dust during the entire life cycle of the product. It is, however, recommended to adopt all the precautions in order that the product not deteriorate and in order to avoid the improbable possibility of dust formation hazardous for the human health.
Further information
On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. For further information see section 7 of the sheet.
2.1 Classification of the substance or mixture
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) and subsequent amendments and adjustments. Mixture classification has been determined by the physical state in which it is commercialized and in which it can be reasonably consider will be used. Hazard classification and indication
