DynaTrol II Base

Hazard statements (CLP)

H315, H317, H319, H332, H334, H335, H351

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

OSHA GLOBAL HARMONIZATION LABELING AND CLASSIFICATION: Classified in accordance with Global Harmonization Standard under U.S. OSHA Hazard Communication Standard, Canadian WHMIS HPR-GHS 2015.

2.1 Classification of the substance or mixture

Carcinogenic Cat. 2, Acute Inhalation Toxicity Cat. 4, Skin Irritation Cat. 2, Skin Sensitization Cat. 1, Eye Irritation Cat. 2A, STOT (Inhalation-Respiratory Irritation) SE Cat. 3, Respiratory Sensitization Category 1

Signal word

Danger

Hazard statements

H351, H332, H315, H317, H319, H335, H334

Precautionary statements

Codes P201, P202, P261, P264, P270, P271, P272, P280, P284, P308 + P313, P304 + P340, P312, P302 + P352, P333 + P313, P362 + P364, P305 + P351 + P338, P337 + P313, P321, P403 + P233, P405, P501

Hazard pictograms

GHS07, GHS08 EMERGENCY OVERVIEW: Physical Description: This product is a heavy paste with a mild odor characteristic of isocyanates.

Health hazards

DANGER! May be harmful by inhalation or ingestion. May cause skin, eye and respiratory tract irritation, especially if exposure is prolonged. Can cause skin and respiratory sensitization due to the presence of isocyanates. The Diphenylmethane 4,4’-Diisocyanate is a suspect carcinogen. Flammability Hazard: This product is expected to be combustible and can ignite if exposed to high temperatures for a prolonged period or if subjected to flame. Reactivity Hazard: Due to the Polyether Ether component, there is a possibility of slow decomposition in air to form peroxides. The product contains stabilizers to prevent oxidization and polymerization. Depletion of stabilizers in the product can cause decomposition. Contact with water may cause polymerization and rupture of closed containers.

Environmental hazards

This product has not been tested for potential harm to aquatic organisms. All release to the environment should be avoided HAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS®) Health 2* See Section 16 for definitions of ratings Flammability 1 0 = Minimal 3 = Serious 1 = Slight 4 = Severe

Physical hazards

1 2 = Moderate * = Chronic HMIS® is a registered trademark of the National Paint and Coatings Association. CANADIAN WHMIS (HPR-GHS) 2015 CLASSIFICATION AND SYMBOLS: See Section 16 for in Classification and Symbols under HPR-GHS 2015. U.S. OSHA REGULATORY STATUS: This product has a classification under the Global Harmonization Standard, as applied under OSHA regulations, as given earlier in this Section. See Section 16 for full classification details.