Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
General Information
Revision date
2016-07-22
Product name
Pasco Aquaprime PU
1.2.1 Relevant identified uses
One part polyurethane primer, used as a primer for concrete substrates. Applied by brush or roller
supplier name
Pasco Construction Solutions Pty Ltd
Icons in SDS
Company Information
company name
Pasco Construction Solutions Pty Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H312, H315, H317, H332, H334, H336, H351
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
This material is hazardous according to health criteria of Safe Work Australia.
Signal word
Danger
2.1 Classification of the substance or mixture
Flammable Liquids - Category 3 Acute Toxicity - Dermal - Category 4 Acute Toxicity - Inhalation - Category 4 Skin Corrosion/Irritation - Category 2 Sensitisation - Respiratory - Category 1 Sensitisation - Skin - Category 1 Carcinogenicity - Category 2 Specific Target Organ Toxicity (Single Exposure) - Category 3 Narcotic Effects
Hazard statements
H226 Flammable liquid and vapour. H312 Harmful in contact with skin. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H336 May cause drowsiness or dizziness. H351 Suspected of causing cancer .
Prevention
P102 Keep out of reach of children. P103 Read label before use. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical, ventilating, lighting and all other equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P261 Avoid breathing dust, fume, gas, mist, vapours or spray.. P264 Wash hands, face and all exposed skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P281 Use personal protective equipment as required. P285 In case of inadequate ventilation wear respiratory protection.
Response
P101 If medical advice is needed, have product container or label at hand. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P362 Take off contaminated clothing and wash before reuse.
Storage
P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Precautionary statements
P501 Dispose of contents/container in accordance with local, regional, national and international regulations. Poison Schedule: S6. Poison
Classifications
Dangerous Goods Class: