THERM-A-GAP GEL 8017HF (XTS-8017HF)

Parker Hannifin Ltd.

Revision date : 2015-07-28

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

Note: Ingredients listed on restricted chemical lists

EC/CAS

215-691-6/1344-28-1

Name of the chemical

aluminium oxide

Concentration

90.0-100.0

EC/CAS

208-764-9/541-02-6

Name of the chemical

D5

Concentration

0.1-0.3

EC/CAS

200-001-8/50-00-0

Name of the chemical

Formaldehyde

Concentration

N/A

General Information

Revision date

2015-07-28

Product name

THERM-A-GAP GEL 8017HF (XTS-8017HF)

Chemical name

Material is a fully cured compound consisting of: Inorganic substances in powdered form; Silicone gel; Siloxanes

1.2.1 Relevant identified uses

Fully cured dispensable gel for use in gap filling

supplier name

Parker Hannifin Ltd.

Emergency telephone

(800) 535-5053, (352) 323-3500

Icons in SDS

M004 M009 M010 M011 M017

Company Information

company name

Parker Hannifin Ltd.

e-mail address of the competent person responsible for the Safety Data Sheet

chomailbox@parker.com

Section 2

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification applies

Physical hazards

Not classified for physical hazards

Health hazards

Occupational exposure to the substance or mixture may cause adverse effects

Environmental hazards

Not classified for hazards to the environment An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. See Section 12 for more environmental information Specific hazards Main symptoms Burning produces obnoxious and toxic fumes. When heated above 150°C in air, may release formaldehyde gas Inhalation of fumes may result in metal fume fever, a flu-like illness. Symptoms of metal fume fever may include fever, fatigue, vomiting, muscle aches and shortness of breath. May cause mild respiratory irritation at higher temperatures. Symptoms may include upper respiratory irritation, coughing and breathing difficulties If material is ingested, may cause irritation to mucous membranes. May cause nausea, stomach pain and vomiting When heated above 150°C in air, may release formaldehyde gas. Formaldehyde is an eye and throat irritant and acute toxicant. Formaldehyde may cause sensitisation by skin contact. Formaldehyde has shown limited evidence of a carcinogenic effect

Other hazards which do not result in classification

Toxic fumes, gases or vapours may evolve on burning. May cause mild respiratory irritation at higher temperatures. Inhalation of fumes may result in metal fume fever, a flu-like illness. May cause gastrointestinal irritation. When heated above 150°C in air, may release formaldehyde gas. Formaldehyde is an eye and throat irritant and acute toxicant. Formaldehyde may cause sensitisation by skin contact. Formaldehyde has shown limited evidence of a carcinogenic effect. PBT assessment: This mixture contains substances considered to be very persistent and very bioaccumulating (vPvB). Contains: Octamethylcyclotetrasiloxane; Decamethylcyclopentasiloxane. See ECOLOGICAL INFORMATION, Section 12.

2.1 Classification of the substance or mixture

The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification applies. Classification according to Directive 67/548/EEC or 1999/45/EC as amended Classification This preparation is not classified as dangerous according to Directive 1999/45/EC. Classification according to Regulation (EC) No 1272/2008 as amended Supplemental Hazards The product is not classified as hazardous according to Regulation (EC) No. 1272/2008. Physical hazards The product is not classified as hazardous according to Regulation (EC) No. 1272/2008. Health hazards The product is not classified as hazardous according to Regulation (EC) No. 1272/2008. Environmental hazards Not an environmentall hazard according to Regulation (EC) No. 1272/2008. Hazard summary Physical hazards Not classified for physical hazards. Health hazards Occupational exposure to the substance or mixture may cause adverse effects. Environmental hazards Not classified for hazards to the environment. An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. See Section 12 for more environmental information. Specific hazards Burning produces obnoxious and toxic fumes. When heated above 150°C in air, may release formaldehyde gas. Main symptoms Inhalation of fumes may result in metal fume fever, a flu-like illness. Symptoms of metal fume fever may include fever, fatigue, vomiting, muscle aches and shortness of breath. May cause mild respiratory irritation at higher temperatures. Symptoms may include upper respiratory irritation, coughing and breathing difficulties. If material is ingested, may cause irritation to mucous membranes. May cause nausea, stomach pain and vomiting. When heated above 150°C in air, may release formaldehyde gas. Formaldehyde is an eye and throat irritant and acute toxicant. Formaldehyde may cause sensitisation by skin contact. Formaldehyde has shown limited evidence of a carcinogenic effect.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.