CHO-BOND 360

Hazard statements (CLP)

H315, H317, H319, H341, H412

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture Liquid - grey. Mild odour

Most important adverse effects

Excessive heating above 50°C / 122°F may degrade the resin component Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of causing genetic defects. Occupational exposure to the substance or mixture may cause adverse effects. For further information, please refer to section 11 of the SDS Harmful to aquatic life with long lasting effects. Avoid release to the environment. See Section 12 for more environmental information

Hazardous Ingredients

Reaction product: bisphenol-A-(epichlorohydrin); 2,3-epoxypropyl o-tolyl ether

Signal word

Warning!

Hazard statements

H315 - Causes skin irritation. H319 - Causes serious eye irritation. H317 - May cause an allergic skin reaction. H341 - Suspected of causing genetic defects. H412 - Harmful to aquatic life with long lasting effects.

Precautionary statements

P201 - Obtain special instructions before use. P280 - Wear protective gloves/clothing and eye/face protection. P308 + P313 - IF exposed or concerned: Get medical advice/attention. P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 - Take off contaminated clothing and wash it before reuse. P501 - Dispose of contents/container in accordance with local regulation.

Other hazards which do not result in classification

Excessive heating above 50°C / 122°F may degrade the resin component. May release peroxides on exposure to light and air, or on contact with incompatibles. Rate of peroxide formation is not known. Burning produces obnoxious and toxic fumes. Mild respiratory irritant. Inhalation of fumes may result in metal fume fever, a flu-like illness. May cause gastrointestinal irritation. Silver in the form of a finely divided dust may cause discoloration in contact with skin, and argyrosis in case of inhalation. Endocrine disrupting properties: May cause endocrine disruption. PBT assessment: This mixture contains no substance considered to be persistent, bioaccumulating nor toxic (PBT).

2.1 Classification of the substance or mixture

Liquid - grey. Mild odour. Most important hazards: Excessive heating above 50°C / 122°F may degrade the resin component. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of causing genetic defects. Occupational exposure to the substance or mixture may cause adverse effects. For further information, please refer to section 11 of the SDS. Harmful to aquatic life with long lasting effects. Avoid release to the environment. See Section 12 for more environmental information. This mixture is classified as hazardous in accordance with Regulation (EC) No 1272/2008. Classification: Skin corrosion/irritation - Category 2; H315 Eye damage/irritation - Category 2; H319 Skin sensitization - Category 1; H317 Germ cell mutagenicity - Category 2; H341 Hazardous to the aquatic environment; Chronic aquatic hazard - Category 3; H412