Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
7440-22-4
Name of the chemical
Silver
Concentration
N/A
General Information
Revision date
2018-06-27
Product name
PRO-SHIELD 7113, Part A
Chemical name
Mixture of: Silver plated copper powder; Esters; Epoxy resin; Ketones; Alcohols; talc
1.2.2. Uses advised against
known
supplier name
Parker Hannifin Corp
Icons in SDS
Company Information
company name
Parker Hannifin Corp
GHS Information
Signal word
DANGER!
Section 2
2.1 Classification of the substance or mixture
Light brown paste. Solvent odor.
Most important adverse effects
Highly flammable liquid and vapor. This material may be ignited by heat, sparks and direct flame. Irritating to eyes, respiratory system and skin. May cause an allergic skin reaction. Inhalation may cause central nervous system depression. Occupational exposure to the substance or mixture may cause adverse effects. For further information, please refer to section 11 of the SDS. Harmful to aquatic life with long lasting effects. Avoid release to the environment. See Section 12 for more environmental information. This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Classification: Flammable liquid - Category 2 Skin corrosion/irritation - Category 2 Eye damage/irritation - Category 2A Skin sensitization - Category 1 Specific target organ toxicity, single exposure - Category 3 (Respiratory irritation; Narcotic effects)
Signal word
DANGER!
Hazard statements
Highly flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. May cause respiratory irritation. May cause drowsiness or dizziness.
Precautionary statements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources - No smoking. Keep container tightly closed. Ground/Bond container and receiving equipment. Use explosion-proof electrical and ventilating equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing fumes, mists or vapors. Wash exposed skin thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves and eye/face protection. IF ON SKIN Wash with plenty of soap and water. If skin irritation or rash occurs Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. In case of fire, use dry chemical, CO2, or alcohol foam to extinguish. Store in a well-ventilated place. Keep container tightly closed. Keep cool. Store locked up. Dispose of contents/container in accordance with local regulation.
Other hazards which do not result in classification
After prolonged storage, may release explosive peroxides in the presence of air. Direct sunlight or heat may accelerate the release of peroxides. Inhalation of fumes may result in metal fume fever, a flu-like illness. May cause gastrointestinal irritation. Prolonged overexposure may cause slight liver and kidney effects, such as increased organ weights. Silver in the form of a finely divided dust may cause discoloration in contact with skin, and argyrosis in case of inhalation.
