Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
EC/CAS
7440-22-4
Name of the chemical
Silver
Concentration
N/A
EC/CAS
2210-79-9
Name of the chemical
[(p-Tolyloxy)methyl]oxiran; [2,3-Epoxypropyl-p-tolylether] [(m-Tolyloxy)methyl]oxiran 2,3-Epoxypropyl-o-tolylether [(Tolyloxy)methyl]oxiran; Kresylglycidylether
Concentration
N/A
General Information
Revision date
2017-12-28
Product name
CHO-BOND 360
Chemical name
Mixture of: Silver plated copper powder; Epoxy resin; Ether
1.2.2. Uses advised against
known
supplier name
Parker Hannifin Corp
Emergency telephone
(800) 535-5053 (Within Continental US); (352) 323-3500 (Outside US
Icons in SDS
Company Information
company name
Parker Hannifin Corp
GHS Information
Signal word
WARNING!
Section 2
2.1 Classification of the substance or mixture
Grey liquid. Mild odor.
Most important adverse effects
May cause an allergic skin reaction. Suspected of causing genetic defects. Occupational exposure to the substance or mixture may cause adverse effects. For further information, please refer to section 11 of the SDS. Harmful to aquatic life with long lasting effects. Avoid release to the environment. See Section 12 for more environmental information. This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Classification: Skin sensitization - Category 1 Germ cell mutagenicity - Category 2
Signal word
WARNING!
Hazard statements
May cause an allergic skin reaction. Suspected of causing genetic defects.
Precautionary statements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust, fume or vapors. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/clothing and eye/face protection. IF exposed or concerned: Get medical advice/attention. IF ON SKIN Wash with plenty of soap and water. If skin irritation or rash occurs Get medical advice/attention. Wash contaminated clothing before reuse. Store locked up. Dispose of contents/container in accordance with local regulation.
Other hazards which do not result in classification
Excessive heating above 50°C / 122°F may degrade the resin component. May release peroxides on exposure to light and air, or on contact with incompatibles. Rate of peroxide formation is not known. Toxic fumes, gases or vapors may evolve on burning. May be mildly irritating to skin, eyes and respiratory system. Inhalation of fumes may result in metal fume fever, a flu-like illness. May cause gastrointestinal irritation. Silver in the form of a finely divided dust may cause discoloration in contact with skin, and argyrosis in case of inhalation.
