Note: Ingredients listed on restricted chemical lists
EC/CAS
111-40-0
Name of the chemical
2,2'-iminodi(ethylamine)
Concentration
<1 %
EC/CAS
80-05-7
Name of the chemical
4,4'-isopropylidenediphenol
Concentration
<1 %
EC/CAS
112-57-2
Name of the chemical
3,6,9-triazaundecamethylenediamine
Concentration
100%
General Information
Version
3.0
Revision date
2025-07-04
Product name
FOSROC NITOMORTAR AP HARDENER
1.2.1 Relevant identified uses
Multi purpose, epoxy adhesive repair paste, also used as an adhesive for Fosroc Nitofill LV and Emer-Band bandage systems. Applied by notched trowel, putty knife or caulking gun, depending upon the application
supplier name
Parchem Construction Supplies Pty Ltd
Icons in SDS
Company Information
company name
Parchem Construction Supplies Pty Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H317, H334, H361
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
This material is hazardous according to the criteria of EPA New Zealand GHS 7. EPA Group Standard: HSR002658 - Surface Coatings and Colourants (Corrosive) Group Standard 2020
Signal word
Danger Hazard Classifications Skin Corrosion - Category 1B Serious Eye Damage - Category 1 Sensitisation - Respiratory - Category 1 Sensitisation - Skin - Category 1 Toxic to Reproduction - Category 2
Hazard statements
H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H361 Suspected of damaging fertility or the unborn child .
Prevention
P102 Keep out of reach of children. P103 Read carefully and follow all instructions. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust, fume, gas, mist, vapours or spray. P264 Wash hands, face and all exposed skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P281 Use personal protective equipment as required. P285 In case of inadequate ventilation wear respiratory protection.
Response
P101 If medical advice is needed, have product container or label at hand. P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting. P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower] P304+P341 IF INHALED If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 Immediately call a POISON CENTER/doctor. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTRE or doctor/physician. P363 Wash contaminated clothing before reuse.
Storage
P405 Store locked up.
Precautionary statements
P501 Dispose of contents/container in accordance with local, regional, national and international regulations. DANGEROUS GOOD CLASSIFICATION Classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land" Dangerous Goods Class: 8
2.1 Classification of the substance or mixture
Skin Corrosion - Category 1B Serious Eye Damage - Category 1 Sensitisation - Respiratory - Category 1 Sensitisation - Skin - Category 1 Toxic to Reproduction - Category 2 Hazard Statements H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H361 Suspected of damaging fertility or the unborn child .