Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
91-95%
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
General Information
Revision date
2023-03-22
Product name
Engineered Lumber Wood-I-Joists (LVL/Lumber/OSB construction)
Emergency telephone
1-800-424-9300, +1 703-527-3887
Icons in SDS
Company Information
company name
Pacific Woodtech Corporation
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H334, H335, H350, H372
Hazard statements
Code
Statements
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H319
Causes serious eye irritation
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335
May cause respiratory irritation
H350
May cause cancer
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
Health hazards
Sensitization - Respiratory 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled Carcinogenicity 1A H350 May cause cancer Specific Target Organ Toxicity Repeated Exposure 1 H372 Causes damage to organs through prolonged or repeated exposure Skin Irritation 2 H315 Causes skin irritation Eye Irritation 2A H319 Causes serious eye irritation Sensitization Skin 1 H317 May cause an allergic skin reaction Specific Target Organ Toxicity Single Exposure 3 H335 May cause respiratory irritation Combustible Dust May form combustible dust concentrations in air Additional information Hazards exempt when in solid form or when it cannot be released due to cutting, grinding, heating, etc Individual customer processes (such as grinding, sawing, or blasting) may result in the formation of dust that may present health hazards. Wear protective gloves/protective clothing/eye protection
Hazard pictograms
OD PWT
Signal word
Danger
Hazardous Ingredients
Wood, wood dust, all soft and hard woods Diphenylmethanediisocyanate, isomeres and homologues
Hazard statements
H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H350 May cause cancer. H335 May cause respiratory irritation. H372 Causes damage to organs through prolonged or repeated exposure. May form combustible dust concentrations in air.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapors/spray. P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. P284 [In case of inadequate ventilation] wear respiratory protection. P302+P352 If on skin: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P304+P341 If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P312 Call a poison center/doctor if you feel unwell. P321 Specific treatment (see supplementary first aid instructions on this Safety Data Sheet). P314 Get medical advice/attention if you feel unwell. P362+P364 Take off contaminated clothing and wash it before reuse. P332+P313 If skin irritation occurs: Get medical advice/attention. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P342+P311 If experiencing respiratory symptoms: Call a poison center/doctor. P363 Wash contaminated clothing before reuse. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations. - Unknown acute toxicity: This value refers to knowledge of known, established toxicological or ecotoxicological values. 9 % of the mixture consists of component(s) of unknown toxicity. PWT
Classification system
NFPA/HMIS Definitions O0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme - NFPA ratings (scale 0 - 4) Health = 2 Fire =O Reactivity = 0 - HMIS-ratings (scale 0 - 4) HEALTH Health = *2 FIRE Fire =O Physical Hazard = 0
2.3 Other hazards
None known - Non-hazardous components: 9003-35-4 Formaldehyde Resins 1-9%
2.1 Classification of the substance or mixture
Health hazard Sensitization - Respiratory 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Carcinogenicity 1A H350 May cause cancer. Specific Target Organ Toxicity - Repeated Exposure 1 H372 Causes damage to organs through prolonged or repeated exposure. Skin Irritation 2 H315 Causes skin irritation. Eye Irritation 2A H319 Causes serious eye irritation. Sensitization - Skin 1 H317 May cause an allergic skin reaction. Specific Target Organ Toxicity - Single Exposure 3 H335 May cause respiratory irritation. Combustible Dust May form combustible dust concentrations in air. - Additional information: Hazards exempt when in solid form or when it cannot be released due to cutting, grinding, heating, etc. Individual customer processes (such as grinding, sawing, or blasting) may result in the formation of dust that may present health hazards. Wear protective gloves/protective clothing/eye protection.