Note: Ingredients listed on restricted chemical lists
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
N/A
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
N/A
EC/CAS
203-550-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
N/A
EC/CAS
203-905-0
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
N/A
General Information
Revision date
2011-12-01
Product name
B2100 BOYSE EPOXY EAMEL
1.2.1 Relevant identified uses
Boysen Epoxy Enamel is a high quality, two-component, epoxy-polymide system that has excellent corrosion resistance and sealing properties. Highly alkali-resistant so there is no need for neutralization of new concrete Principal Uses: As a topcoat for Boysen Epoxy Primer that can be applied on interior surfaces such as
Icons in SDS
Company Information
company name
Pacific Paint (Boysen) Phils., Inc
e-mail address of the competent person responsible for the Safety Data Sheet
inquiry@boysen.com.ph
GHS Information
Signal word
Danger
Section 2
Hazard statements
Xn Harmful F Highly flammable · Information concerning particular hazards for human and environment: The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. R 11 Highly flammable. R 20/21 Harmful by inhalation and in contact with skin. R 38 Irritating to skin.
Classification system
The classification is according to the latest editions of the EU-lists, and extended by company and literature data.
2.2 Label elements
Danger 2.6/2 - Highly flammable liquid and vapour. Warning 3.1/4 - Harmful in contact with skin. 3.1/4 - Harmful if inhaled. 3.2/2 - Causes skin irritation.
Prevention
Keep away from heat/sparks/open flames/hot surfaces. - o smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapours/spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
Response
IF O SKI: Wash with plenty of soap and water. IF O SKI (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF IHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISO CETER or doctor/physician if you feel unwell. Specific treatment (see on this label). Specific measures (see on this label). If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Wash contaminated clothing before reuse. In case of fire Use for extinction CO2, powder or water spray
Storage
Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
