PREFORMED THERMOPLASTIC

Ozark Materials, LLC

Revision date : 2018-10-03

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07 GHS08
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

N/A

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

N/A

General Information

Revision date

2018-10-03

Product name

PREFORMED THERMOPLASTIC

Product Synonyms

Thermoplastic Road Marking/Traffic Marking- Torch-Applied

1.2.1 Relevant identified uses

Traffic Marking

Emergency telephone

770-355-4477

Icons in SDS

Company Information

company name

Ozark Materials, LLC

e-mail address of the competent person responsible for the Safety Data Sheet

contact@ozarkmaterials.net

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H314, H315, H320, H332, H333, H335, H341+H350, H372

Hazard statements

Code

Statements

H314

Causes severe skin burns and eye damage

Section 2

Health hazards

Cold Form Molten/Heated Form None Known Acute toxicity, inhalation Category 3 Serious eye damage/eye Category 2A irritation Germ cell mutagenicity Category 2 Carcinogenicity Category 1A Specific target organ toxicity, Category 3 single exposure; Respiratory tract irritation Specific target organ toxicity, Category 1 repeated exposure Environmental Cold Form Molten/Heated Form Acute Toxicity None Known Not Available Chronic Toxicity None Known Not Available

Physical hazards

Cold Form Molten/Heated Form None Known

2.2 Label elements

None Required

Signal word

Danger

Hazard statements

Cold Form Molten/Heated Form H315: Causes skin irritation H314: Causes severe skin burns and eye damage H320: Causes eye irritation H332: Harmful if inhaled H333: May be harmful if H335: May cause respiratory irritation. inhaled H341+ H350 Suspected of causing genetic defects May cause cancer H372: Causes damage to organs through prolonged or repeated

Prevention

Precautionary statements P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/gas/mist/vapors/spray P264: Wash skin thoroughly after handling. P270: Do not eat, drink or smoke when using this product P271: Use only outdoors or in a well-ventilated area P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response

P304 IF INHALED Remove person to fresh air and Keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. P305 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 IF EYE IRRITATION PERSISTS: Get medical advice/attention P308 + P313 IF EXPOSED or CONCERNED Get medical advice/attention. Get medical advice or attention if you feel unwell.

Storage

P403 + P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up.

Disposal

P501: Dispose of contents/ container to an approved waste disposal plant.

2.3 Other hazards

Cold Form Molten/Heated Form None Known Molten/Heated product presents a thermal hazard.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.