Riocord PS

Hazard statements (CLP)

H200, H201

Code

Statements

H200

Unstable Explosive

SECTION 2: Hazards identification

Classification according to Regulation (EC) No 1272/2008 (CLP/GHS): Classification of the substance or mixture

Signal word

Danger

Hazard statements

H201 Explosive; mass explosion hazard.

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P230 Keep wetted with water. P240 Ground and bond container and receiving equipment. P250 Do not subject to grinding / shock / friction. P280 Wear protective gloves / protective clothing / eye protection / face protection. P370+P380 In case of fire: Evacuate area. P501 Dispose of contents / container in accordance with local and national regulations.

Supplemental label elements

Explosives are labeled and packaged in accordance with the requirements for explosives only.

Other hazards

PBT / vPvB For results of PBT and vPvB assessment, see point 12.5.

2.3 Other hazards

Risk of explosion. An uncontrolled explosion may cause great physical damage. Risk of explosion by shock, friction, fire or other sources of ignition. Explosion gases are heavier than air and may accumulate below ground level, in pits, channels and basements in higher concentration. Never enter a confined space after detonation, unless adequate mechanical ventilation is provided. During explosion/in case of fire, toxic gases may be formed. e.g. oxides of nitrogen (NO, NO2) and carbon (CO, CO2).

2.1 Classification of the substance or mixture

Classification according to Expl. 1.1; H201 Regulation (EC) No 1272/2008 [CLP / GHS] Additional information on The used PETN inside of the detonating cords is classified under CLP-Regulation classification as an unstable explosive (Unst.Expl.; H200). In case of an accidental release, the spillage must be removed with necessary prudence and care.