Note: Ingredients listed on restricted chemical lists
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
40-70%
General Information
Version
4
Revision date
2018-03-22
Product name
617H119 - ORTHOCRYL Lamination Resin PRO
1.2.1 Relevant identified uses
Lamination Resin for orthopedic procedures Reserved for industrial and professional use
Emergency telephone
+1 (801) 956-2400, +1 (801) 956-2401, +1 (801) 954-2304, +1 (800) 424-9300, +49 (0)178-4337434
Icons in SDS
Company Information
company name
Otto Bock Health Care
e-mail address of the competent person responsible for the Safety Data Sheet
USRegulatory@ottobock.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H335
Hazard statements
Code
Statements
H225
Highly flammable liquid and vapour
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H335
May cause respiratory irritation
Section 2
SECTION 2: Hazards identification
This material is considered hazardous by the OSHA Hazard Communication Standard ( 29 CFR 1910. 1200 ) Emergency overview Appearance Physical state at 68 °F and 101.3 kPa: liquid Form: liquid Color: colorless Odor ester-like Classification Flammable Liquid - Category 2; Skin Irritation - Category 2; Sensitization - skin - Category 1; Specific Target Organ Toxicity (Single Exposure) - Category 3;
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. Causes skin irritation. May cause an allergic skin reaction. May cause respiratory irritation.
Precautionary statements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection. Store in a well-ventilated place. Keep cool. Dispose of contents/container to hazardous or special waste collection point.
2.3 Other hazards
Electrostatic charge. Watch for exothermic reactions with peroxides. Due to reducing substances and heavy metal ions polymerization with heat generation may occur. Potentially explosive mixtures may form if adequate ventilation is not provided. Special danger of slipping by leaking/spilling product. High concentrations of vapor or inhalation for an extended period may lead to paralysis of the central nervous system. Pulmonary edema is possible. see section 11 Toxicological information
2.1 Classification of the substance or mixture
Flammable Liquid - Category 2; Skin Irritation - Category 2; Sensitization - skin - Category 1; Specific Target Organ Toxicity (Single Exposure) - Category 3; Hazard symbols: Signal word: Danger Hazard statements: Highly flammable liquid and vapor. Causes skin irritation. May cause an allergic skin reaction. May cause respiratory irritation.