Note: Ingredients listed on restricted chemical lists
EC/CAS
500-060-2/822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
≥ 0.5 %
General Information
Version
4.0
Revision date
2025-11-19
Product name
Hardener for 2K Wood Oil (6633)
CAS No.
28182-81-2
1.2.1 Relevant identified uses
/ the mixture
supplier name
Osmo Wood and Colour Canada Ltd
Manufacturer Name
Osmo Holz und Color GmbH & Co. KG
Emergency telephone
1-800-424-9300, 001-703-527-3887
Icons in SDS
Company Information
company name
Osmo Wood and Colour Canada Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@osmo.ca, helmut.starp@osmo.de
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H332, H335
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H332
Harmful if inhaled
H335
May cause respiratory irritation
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification of the substance or mixture Acute Toxicity (Inhalation) - Category 4 H332 Harmful if inhaled Sensitization - skin – Category 1 H317 May cause an allergic skin reaction Specific target organ toxicity (single exposure) – H335 May cause respiratory irritation Category 3 Additional information For the wording of the listed hazard phrases refer to section 16
Hazard pictograms
GHS07 (Contd. of page 1)
Signal word
Warning
Hazardous Ingredients
Hexamethylene diisocyanate, oligomers hexamethylene-di-isocyanate
Hazard statements
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves. P302+P352 IF ON SKIN: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 Call a POISON CENTER/doctor if you feel unwell. P362+P364 Take off contaminated clothing and wash it before reuse. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P321 Specific treatment (see on this label). P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container in accordance with national regulations. Information pertaining to particular dangers for man and environment
Classification system
NFPA ratings (scale 0 - 4) Health = 1 Fire = 1 Reactivity = 0 HMIS-ratings (scale 0 - 4) Health = 1 Fire = 1 Reactivity = 0
2.3 Other hazards
Always wear a dust mask when sanding. Observe the general safety regulations when handling chemicals. In case of hypersensitivity of the respiratory tract (asthma, chronic bronchitis), handling of the product is not recommended. Respiratory symptoms may occur even several hours after overexposure. Dust, vapors and aerosols are the main respiratory hazards.
2.1 Classification of the substance or mixture
Acute Toxicity (Inhalation) - Category 4 H332 Harmful if inhaled. Sensitization - skin – Category 1 H317 May cause an allergic skin reaction. Specific target organ toxicity (single exposure) – H335 May cause respiratory irritation. Category 3 Additional information: For the wording of the listed hazard phrases refer to section 16.