Unipol Coldax

Hazard statements (CLP)

H315, H318, H372, H373

Code

Statements

H315

Causes skin irritation

CLP CLASSIFICATION

GHS05 corrosion Eye Dam. 1 H318 Causes serious eye damage. GHS07 Skin Irrit. 2 H315 Causes skin irritation

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008 The substance is classified and labelled according to the CLP regulation.

Hazard pictograms

GHS05

Signal word

Danger

Hazardous Ingredients

Silicic acid, sodium salt, MR > 1,6 < 2,6 CAS: 1344-09-8 Silicic acid, sodium salt, MR > 1,6 < 40-50% EINECS: 215-687-4 2,6 Reg.nr.: 01-2119448725-31-0004 Eye Dam. 1, H318; Skin Irrit. 2, H315 CAS 14808-60-7 siliciumdioxide 40-50% EINECS 238-878-4 SiO2 > 98% This product contains respirable quartz as an impurity and therefore is classified as STOT RE2 according to criteria defined in the Regulation EC 1272/2008 and does not meet the criteria for classification as harmful according to Directive 67/548/EEC. Depending on the type of handling and use (e.g. grinding, drying), airborne respirable crystalline silica may be generated. Prolonged and/or massive inhalation of respirable crystalline silica dust may cause lung fibrosis, commonly referred to as silicosis. Principal symptoms of silicosis are cough and breathlessness. Occupational exposure to respirable crystalline silica dust should be monitored and controlled. This product should be handled with care to avoid dust generation Regulation EC 1272/2008: WARNING STOT RE2 H373: May cause damage to lung through prolonged or repeated exposure by inhalation.

Hazard statements

H315 Causes skin irritation. H318 Causes serious eye damage H372: Causes damage to lungs through prolonged or repeated exposure by inhalation

Precautionary statements

P262 Do not get in eyes, on skin or on clothing. P 280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. This product contains more than 10% quartz (respirable).

PBT Substances

Not applicable 3.1 Substances CAS No. Description: 1344-09-8 Sodium Silicate solution, sodium salt, MR > 1,6 < 2,6 Identification number(s): EC number: 215-687-4 Description: Mixture of substances listed below with nonhazardous additions.

67/548/EEC

No classification This product contains respirable crystalline silica <3% respirable crystalline quartz is tied Additional information For the wording of the listed risk phrases refer to section 16.