ORP 6072 MP

SECTION 2: Hazards identification

1272/2008 None in particular. However the usual precautions used for chemical products should be respected. HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE filter, whose class (1, 2 or 3) must be chosen according to the outcome of risk assessment. None. Do not breathe combustion products. The product is combustible and, when the powder is released into the air in sufficient concentrations and Comply with the safety measures usually applied when handling chemical substances. Note for users: 10.5. Incompatible materials.

HMIS® ratings

On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. in the presence of a source of ignition, it can create explosive mixtures with air. Fires may start or get worse by leakage of the solid product HAND PROTECTION Substances subject to the Rotterdam Convention: The information contained in the present sheet are based on our own knowledge on the date of the last version. Users must verify the Health: 1 Information not available. Health: 1 Fire:1 Reactivity 0 PPE E from the container, when it reaches high temperatures or through contact with sources of ignition. None required. None. suitability and thoroughness of provided information according to each specific use of the product.

Other hazards

SKIN PROTECTION This document must not be regarded as a guarantee on any specific product property.

2.1 Classification of the substance or mixture

5.3. Advice for firefighters. None required. Substances subject to the Stockholm Convention: The use of this product is not subject to our direct control; therefore, users must, under their own responsibility, comply with the current health 10.6. Hazardous decomposition products. Information not available. GENERAL INFORMATION EYE PROTECTION None. The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation

TOXICOLOGICAL INFORMATION

water used for extinction and the remains of the fire according to applicable regulations. Use a type P filtering facemask (see standard EN 149) or equivalent device, whose class (1, 2 or 3) and effective need, must be defined Information not available. Hazard classification and indication: -- 13.1. Waste treatment methods. SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS according to the outcome of risk assessment. Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with ENVIRONMENTAL EXPOSURE CONTROLS. Reuse, when possible. Neat product residues should be considered special non-hazardous waste. 11.1. Information on toxicological effects. 15.2. Chemical safety assessment. self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137). The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.

2.2 Label elements

compliance with environmental standards. Solid residues may be suitable for disposal in an authorised landfill site. ACUTE TOXICITY. CONTAMINATED PACKAGING No chemical safety assessment has been processed for the mixture and the substances it contains. SECTION 6. Accidental release measures.

Hazard pictograms

Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations. SECTION 9. Physical and chemical properties. LC50 (Inhalation - vapours) of the mixture: Not classified (no significant component). 6.1. Personal precautions, protective equipment and emergency procedures.

Signal word

9.1. Information on basic physical and chemical properties. LC50 (Inhalation - mists / powders) of the mixture: Use breathing equipment if fumes or powders are released into the air. These indications apply for both processing staff and those involved in Not classified (no significant component). SECTION 14. Transport information. LD50 (Oral) of the mixture: Not classified (no significant component).

Hazard statements

emergency procedures. Appearance Changes to previous review: -- powder LD50 (Dermal) of the mixture: Colour The product is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail The following sections were modified: white Not classified (no significant component). LEGEND:

Precautionary statements

Avoid dust formation. Do not breathe dust. Odour (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations. - ADR: European Agreement concerning the carriage of Dangerous goods by Road 01 / 02 / 04 / 07 / 08 / 11 / 14 / 15. -- characteristic SKIN CORROSION / IRRITATION. Odour threshold. Not available. - CAS NUMBER: Chemical Abstract Service Number 6.2. Environmental precautions.

UN Number

Does not meet the classification criteria for this hazard class. pH. 5,0-8,0 (1:1 aqueous soln.) - CE50: Effective concentration (required to induce a 50% effect)

2.3 Other hazards

The product must not penetrate into the sewer system or come into contact with surface water or ground water. Melting point / freezing point. - CE NUMBER: Identifier in ESIS (European archive of existing substances) SERIOUS EYE DAMAGE / IRRITATION. Not available. Initial boiling point. Not applicable. - CLP EC Regulation