ZnSe lens for high power CO2 lasers (Duralens)

Ophir Optronics Solutions Ltd

Revision date : 2017-03-08

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS06 GHS09
Health risk rating 4
Safety risk rating 1
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

1315-09-9

Name of the chemical

Zinc selenide

Concentration

N/A

Listed in

General Information

Revision date

2017-03-08

Product name

ZnSe lens for high power CO2 lasers (Duralens)

1.2.1 Relevant identified uses

of the product ZnSe lens for high power CO2 laser (Duralens™)

1.2.2. Uses advised against

Uses other than as mentioned above

Emergency telephone

24h/24h (Telephone advice: English) +972-52-2286063

Icons in SDS

Company Information

company name

Ophir Optronics Solutions Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

Dvir.Frankel@ophiropt.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H301, H301+H331, H331, H400, H410

Hazard statements

Code

Statements

H301

Toxic if swallowed

Section 2

2.1 Classification of the substance or mixture

Classification in accordance to Regulation (EC) No. 1272/2008 (CLP/GHS) Product name Acute toxicity, Oral (Category 3) H301 Acute toxicity, Inhalation (Category 3) H331 ZnSe lens (Duralens™). Acute aquatic toxicity (Category 1) H400 Chronic aquatic toxicity (Category 1) H410

2.2 Label elements

Labeling in accordance with Regulation 1272/2008 (CLP)

Signal word

DANGER

Hazard statements

H301+H331 - Toxic if swallowed or if inhaled. H410 - Very toxic to aquatic life with long lasting effects None known

Precautionary statements

P201 - Obtain special instructions before use. P260 - Do not breathe dust/fume/gas/mist/ vapours/spray. P262 - Do not breathe dust / fume/ mist. P273 - Avoid release to the environment P301+P310+P330 - IF SWALLOWED: Immediately call a POISON CENTER /doctor. Rinse mouth. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P403+P233 - Store in a well-ventilated place. Keep container tightly closed.

2.3 Other hazards

The optical coating is defined as a Radioactive Sealed Source with a layer of Thorium Fluoride embedded in the structure. The dosage is extremely low and well below any notifiable levels but care must be taken not to scratch the coating and release any Thorium Fluoride. Low level Radioactive sealed source component. This substance/mixture contains no components considered to be either Persistent, Bioaccumulative and Toxic (PBT), or very Persistent and very Bioaccumulative (vPvB) at levels of 0.1% or higher.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.