Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
60.0-100.0 5.0-10.0
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
5.0-10.0
EC/CAS
75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
3.0-7.0
General Information
Revision date
2018-01-29
Product name
UlTRASEAL PF-50
1.2.1 Relevant identified uses
Polyurethane Foam Sealant
supplier name
NUCO Inc.
Emergency telephone
(800) 535-5053
Icons in SDS
Company Information
company name
NUCO Inc.
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Classification Flammable aerosol - Category 1; Gas under pressure - Compressed gas; Acute toxicity (Inhalation) - Category 4; Skin irritation - Category 2; Eye irritation - Category 2A; Respiratory sensitization - Category 1; Skin sensitization - Category 1; Specific target organ toxicity (single exposure) - Category 3; Specific target organ toxicity (repeated exposure) - Category 2 Label Elements
Signal word
Danger Hazard Statement(s) Extremely flammable aerosol Pressurized container: may burst if heated Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation Suspected of causing cancer May cause damage to organs through prolonged or repeated exposure
Product definition
UlTRASEAL ® PF-50 - Ver. 1
Prevention
Date of preparation Keep away from heat, sparks, open flames, and hot surfaces. – No smoking. January 27, 2017 Do Date not of Last spray Revision: on an open flame January or other 29, 2018 ignition source. Page 01 of 09 Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Wear eye protection/face protection. Wear protective gloves. Wash hands and skin thoroughly after handling. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep away from heat, sparks, open flames, and hot surfaces. – No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Wear eye protection/face protection. Wear protective gloves. Wash hands and skin thoroughly after handling. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
Store in a well-ventilated place. Keep container tightly closed. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Store in a well-ventilated place. Keep container tightly closed. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Disposal
Dispose of contents and container in accordance with local, regional, national and international regulations. Dispose of contents and container in accordance with local, regional, national and international regulations.
2.3 Other hazards
None known.
2.1 Classification of the substance or mixture
Flammable aerosol - Category 1; Gas under pressure - Compressed gas; Acute toxicity (Inhalation) - Category 4; Skin irritation - Category 2; Eye irritation - Category 2A; Respiratory sensitization - Category 1; Skin sensitization - Category 1; Specific target organ toxicity (single exposure) - Category 3; Specific target organ toxicity (repeated exposure) -
