SPRAY, Spray Filler

Hazard statements (CLP)

H226, H315, H319, H361d, H372

Code

Statements

H226

Flammable liquid and vapour

2.1 Classification of the substance or mixture

The mixture was classified as dangerous pursuant to current regulations - see Section 15.

CLP CLASSIFICATION

Reproductive toxicity, Hazard Category 2 (Repr.2) Suspected of damaging the unborn child. Irritating effect on skin, category 2 (Skin Irrit.2). Causes skin irritation. Serious eye damage/eye irritation, Hazard Category 2 (Eye Irrit.2). Causes serious eye irritation. Specific target organ toxicity — Repeated exposure, Hazard Category 1 (STOT RE 1) Cause damage to organs (hearing organs) through prolonged or repeated exposure. Liquid, flammable substances, category 3 (Flam. Liq. 3). Flammable liquid and vapour.

Contains

styrene

Signal word

Danger H226 Flammable liquid and vapour. H361d Suspected of damaging the unborn child. H315 Causes skin irritation. H319 Causes serious eye irritation. H372 Cause damage to organs (hearing organs) through prolonged or repeated exposure. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe dust/vapours. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection. P312 Call a doctor if you feel unwell.

2.3 Other hazards

Styrene vapours form explosive air mixtures. The vapours are heavier than air and accumulate near the ground and in the lower parts of the premises. At high temperatures or by contact with strong oxidizers, peroxides, strong acids, alkalis, metallic salts, copper or copper alloys, styrene will polymerise. Styrene polymerisation is highly exothermic.