Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
N/A
EC/CAS
202-851-5
Name of the chemical
Styrol (605/2014)
Concentration
N/A
General Information
Revision date
2000-09-25
Product name
LIGHT - LIGHT PUTTY
CAS No.
100-42-5
1.2.1 Relevant identified uses
Putties (component A) based on non-saturated polyester resins used for levelling scratches and pits before spraying. For
Emergency telephone
+48 61 810-99-09 (from 07.00 to 15.00
Icons in SDS
Company Information
company name
NOVOL Sp. z o.o
e-mail address of the competent person responsible for the Safety Data Sheet
novol@novol.pl, dokumentacja@novol.pl
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H361d, H372
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
The mixture was classified as dangerous pursuant to current regulations - see section 15. 1272/2008/WE Reproductive toxicity, Hazard Category 2 (Repr.2) Suspected of damaging the unborn child. Irritating effect on skin, category 2 (Skin Irrit.2). Causes skin irritation. Serious eye damage/eye irritation, Hazard Category 2 (Eye Irrit.2). Causes serious eye irritation. Specific target organ toxicity — Repeated exposure, Hazard Category 1 (STOT RE 1) Cause damage to organs (hearing organs) through prolonged or repeated exposure. Liquid, flammable substances, category 3 (Flam. Liq. 3). Flammable liquid and vapour.
Contains
styrene
Signal word
Danger H226 Flammable liquid and vapour. H361d Suspected of damaging the unborn child. H315 Causes skin irritation. H319 Causes serious eye irritation. H372 Cause damage to organs (hearing organs) through prolonged or repeated exposure. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe dust/vapours. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection. P312 Call a doctor if you feel unwell.
2.3 Other hazards
Styrene fumes form explosive mixtures with air. Fumes are heavier than air and accumulate close to the ground level and in lower parts of rooms. Styrene polymerization may occur under the influence of high temperature or as a result of contact with strongly oxidizing agents, peroxides, strong acids, bases, metal salts, copper and its alloys. Styrene polymerization is a highly exothermic process.
