Hardener for acrylic filler

Hazard statements (CLP)

H226, H315, H317, H334, H336

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

According to Regulation (EC) No. 1272/2008 (CLP) Classification of the substance or mixture

Adverse physicochemical, human health and environmental effects

No additional information available

Hazard pictograms

GHS02 GHS07 GHS08

Signal word

Danger

Contains

xylene

Hazard statements

H226 - Flammable liquid and vapour. H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H336 - May cause drowsiness or dizziness.

Precautionary statements

P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 - Do not breathe vapours, spray. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves, protective clothing, eye protection, face protection. P312 - Call doctor if you feel unwell. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P501 - Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Supplemental label elements

EUH204 - Contains isocyanates. May produce an allergic reaction.

Additional information

As from 24 August 2023 adequate training is required before industrial or professional use.

Other hazards which do not result in classification

Can react violently with alkalis, as well as a lot of organic products such as alcohols and amines. Reacts with water, generates gases or heat and overpressure rupture containers. Polymerizes on exposure to temperature rise: pressure build-up may cause closed container to burst. Contains no PBT and/or vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII Component Substance(s) not meeting the PBT criteria of REACH Hexamethylen-1,6-Diisocyanat Homopolimer (28182-81-2) regulation, in accordance with Annex XIII Substance(s) not meeting the vPvB criteria of REACH Hexamethylen-1,6-Diisocyanat Homopolimer (28182-81-2) regulation, in accordance with Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or substance(s) are not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No. 1272/2008 [CLP] Flammable liquids, Category 3 H226 Skin corrosion/irritation, Category 2 H315 Respiratory sensitisation, Category 1 H334 Skin sensitisation, Category 1 H317 Specific target organ toxicity – Single exposure, Category 3, H336 Narcosis Full text of H- and EUH-statements: see section 16 Adverse physicochemical, human health and environmental effects No additional information available